Sharp AR-M350N/M450N Service Manual

[1] INTRODUCTION
The AR-M350U/M450U and AR-M350N/M450N are minor change models based on the AR-M350/M450.
This service manual only provides information on these minor changes.
In addition to this service manual, the documents listed below are required to properly maintain these machines.
•AR-M350/M450 Service Manual : 00ZARM350/A1E
•AR-P350/P450 Service Manual : 00ZARP350/A2E
•AR-NC5J Service Manual : 00ZARNC5J/A1E
Note: Depending on the option, additional service documentation may be required.
[2] LIST OF DIFFERENCES FROM AR-M350/M450
A.Product composition
Base Engine
Print Speed
Multi Function Controller
Multi Function Controller(for U-Model)
Print Server Card
Printer Extension Kit
*1: Installation of the AR-P14 on the AR-M350U/M450U will provide similar functionality to that of the AR-M350/M450.
Parts marked with "
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
MODEL
Model Name Printer Option Model
AR-M11
Not Available
AR-NC5J
AR-P14
" are important for maintaining the safety of the set.
SHARP CORPORATION
CODE : 00ZARM350UA1E

LASER PRINTER

AR-M350U/M450U
AR-M350N/M450N
Parts Guide : 00ZARM450/P1E
Parts Guide : 00ZAR350LPP1/
NIC Standard Model
AR-M350U AR-M350N
AR-M450U AR-M450N
35ppm
45ppm
Not Available Standard
Standard Not Available
Not Available Standard
Option Not Available
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
OPTIONS AR-P14
Circuit Diagram : 00ZARM350/C1/
Circuit Diagram : 00ZARP350/C1/
Note
35ppm
45ppm
Not registered as a product
*1