System Setup: Advanced Menu - BenQ CinePrime W2700 User Manual

SYSTEM SETUP: ADVANCED menu

• Reset Lamp Timer: See
Lamp Settings
• Lamp Timer: See
• HDMI Range
Selects a suitable RGB color range to correct the color accuracy.
HDMI
Settings
Password See
With the control keys on the projector and remote control locked, you can prevent
your projector settings from being changed accidentally (by children, for example).
When the Key Lock is on, no control keys on the projector will operate except
To release panel key lock, press and hold
Key Lock
remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
You can turn off the LED warning lights. This is to avoid any light disturbance when
LED Indicator
viewing images in a dark room.
Returns all settings to the factory preset values.
Reset All
Settings
The following settings will still remain: Picture Mode, User Mode Management, Brightness,
Contrast, Color, Tint, Sharpness, Advanced, Projector Position, Sound, Source Rename
and Password.
The ISF calibration menu is password protected and only accessible by authorized
ISF calibrators. The ISF (Imaging Science Foundation) has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these
standards to obtain optimal picture quality from BenQ video display devices.
Accordingly, we recommend that setup and calibration be performed by an ISF
ISF
certified installation technician.
For more information, go to www.imagingscience.com or contact the dealer or retailer from whom
you purchased the projector.
Firmware Updates firmware version.
Upgrade
30 Menu operation
Getting to know the lamp hour on page
• Auto: Automatically selects a suitable color range for the incoming HDMI
signal.
• Full: Utilizes the Full range RGB 0-255.
• Limited: Utilizes the Limited range RGB 16-235.
Utilizing the password function on page
POWER.
Resetting the lamp timer on page
20.
(the right key) on the projector or
36.
32.