Table of Contents
Advertisement
Setting Play Parameters Using the Disc Menu (DVD only)
Some DVDs include a disc menu that you can use to select subtitle set, audio
channel, and Dolby Digital (5.1 channel) or DTS audio. You can also turn disc
menu on and off.
BACKLIGHT
VIEW
OPERATE
HI/LOW/OFF
MODE
DIGITAL
VIRTUAL
GAMMA
TITLE
MENU
SKIP
PLAY
RESUME
STOP
DISPLAY
REV
FWD
CLEAR
MEMORY
To use the disc menu to turn on subtitling
This function can be used only with a disk that has been played once,
even partially.
1
While the disc is playing or stopped, press MENU to display the disc menu.
2
Use ' and " to select the subtitle item on the disc menu.
3
Press ENTER to display the subtitle set number selection screen.
4
Use ' and " to select the subtitle set you want to use.
5
Press ENTER to register your selection and display the subtitles.
Repeat the above procedure to make other disc menu settings.
• The procedure shown here provides only general steps. The actual procedure for
using the disc menu depends on the disc you are using. See the disc jacket for
details.
• The disc menu does not appear immediately after you load a disc into the DVD
player or when the DVD player is in the Standby mode. It appears only after the
disc has been played, even if only partially.
Helpful Hints
• You can also select items by using the number buttons.
78
GB
VIDEO
ADJUST
DIGITAL
S.PICTURE
ENTER
ENTER
RETURN
SKIP
MENU
STILL/PAUSE
SLOW
REPEAT
Number
buttons
PROGRAM
DIRECT
ENTER
MENU
Advertisement
Table of Contents
