Universal Control And Uc Surface; Firmware Updates; Universal Control Launch Window - PRESONUS Quantum 4848 Owner's Manual

4

Universal Control and UC Surface

4.1

Firmware Updates

4 Universal Control and UC Surface
Firmware Updates
4.1

Universal Control Launch Window

4.2
Included in Universal Control is UC Surface, a powerful control
software for your Quantum 4848 that provides extensive metering
as well as configuration options for Quantum 4848 users.
UC Surface is designed to verify that your Quantum 4848 has the correct firmware
version installed. You will be prompted if your Quantum 4848 interface needs its
firmware updated. Click on the Update Firmware button to begin the update.
Warning: Do not power off or disconnect your Quantum 4848 during the
firmware update. Once the firmware update is successfully completed, you
will be alerted and instructed to disconnect your power supply and Thunderbolt
cable and reconnect it before rebooting your device. It is not sufficient to simply
power down your unit, you must disconnect the power source in addition to the
Thunderbolt cable.
When the firmware update is complete, you must disconnect the
physical power source from your Quantum 4848 and reconnect
it. Powering it off it will not complete the update process.
Universal Control is a powerful hardware-management application for all PreSonus
interface products. It allows you to view any PreSonus interface product connected
to your computer or your computer's network.
When Universal Control is launched, you will see the Launch window.
From this window, you can manage all the driver settings.
Quantum 4848
Owner's Manual
10