Related Manuals for iLiving ILG8P30-72
Summary of Contents for iLiving ILG8P30-72
- Page 1 30" Air Circulator With Pedestal Base MODEL: ILG8P30-72 120VAC 60Hz 2.4A, 220W Owner’s Manual PLEASE READ AND SAVE THESE INSTRUCTIONS...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Important Instructions………………………………………. Specifications……………………..………………………….. 5 Installing Instructions……………………….…………..… Operating Instructions……………………….………..… Maintenance and Cleaning………………………………. Troubleshooting……………………………………………. -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS CAUTION: Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Do not use the fan if any part is damaged or missing. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. - Page 4 as motor may restart unexpectedly. 8. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair. 9. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
-
Page 5: Specifications
SPECIFICATION MODEL: ILG8P30-72 120VAC 60Hz 2.4A, 220W Base (1) 14 Washer (1) Coupling (1) 15 Pivot Screw (1) Washer (5) 16 Motor (1) Screw (5) 17 Rear Guard (1) Outer Tube (1) 18 Washer (4) Set Knob (1) 19 Spring Washer (4) -
Page 6: Installing Instructions
INSTALLATION INSTRUCTION COLUMN ASSEMBLY INSTRUCTIONS: 1. Attach the coupling (2) to the base (1) with screws (4), as shown. 2. Loosen the set knob (6) from the outer tube connector (8), extend the inner tube (9) to the desired height, and tighten it. CAUTION: Tighten the set knob (6) fully before attaching the motor (16) to the inner tube (9). -
Page 7: Operating Instructions
OPERATION INSTRUCTION TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Loosen the position knob (10) first and then loosen the pivot screw (15). Tilt the motor (16) to the desired angle and then firmly tighten the pivot screw first and then the position knob. SPEED CONTROL: Pull the chain to LOW, MEDIUM or HIGH to set to the desired speed. -
Page 8: Troubleshooting
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN, PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD CAUSE DAMAGE OR PERSONAL INJURY. Always consult the manufacturer or a certified electrician for further action. Product Specifications Model#: ILG8P30-72 Voltage: 120VAC 60Hz Current: 2.4A Power:...
Need help?
Do you have a question about the ILG8P30-72 and is the answer not in the manual?
Questions and answers