Advertisement
Quick Links
Advertisement
Related Manuals for Lisle Digidown CR
Summary of Contents for Lisle Digidown CR
- Page 1 Digital Tachograph Card Download Device with Bluetooth Upload Function Operating Instructions...
-
Page 2: Initial Setup
Introduction The DigidownCR device downloads data from tachograph cards into its internal memory. After these data files have been downloaded then they can be uploaded via Bluetooth to wherever they are required. This is performed via a Digidown Base box direct to the relevant place or via a suitable Bluetooth-enabled mobile phone to anywhere in the world. - Page 3 Tachograph Card Download Process DigidownCR can read the four types of tachograph cards - driver, workshop, control and company. It can perform this task whilst in either its USB mode or Battery mode. To initiate a download, insert the tachograph card (chip down) into the smart card slot on the top of the unit.
- Page 4 C denotes a card file. The next 2 sections are the date and time of the download. This is followed by the driver name and number. Alternatively the Digidown CR can be programmed to use any of the alternative file name formats. Please contact your dealer for details.
-
Page 5: Led Status
LED Status The LEDs are used to show the status of the card file download/upload and any associated errors. The patterns used are: USB Mode: USB LED on Ready mode. Power is on and the unit is ready to download a tachograph card. - Page 6 The software within the DigidownCR can be upgraded or re-configured when appropriate. Please consult your dealer for details. For more Lisle Design Ltd, New Technology Centre, information please North Haugh, St. Andrews KY16 9SR, Scotland Tel. +44 (0)1334 471435 Fax +44 (0)1334 471438 contact E-mail info@lisledesign.com Web www.lisledesign.com...
- Page 7 Phone Requirements In order to use the Digidown Blue or Digidown CR to upload data files via a mobile phone, the phone must have certain features: Internet access via packet data, e.g. GPRS, EGPRS or 3G, etc.
- Page 8 You will be asked to press and hold the Bluetooth button on the Digidown Blue or activate your Digidown CR by inserting a card and waiting for the Bluetooth light to start flashing, and then press ‘Next’ on the phone. A brief test is carried out whereby the phone searches for the Digidown unit, connects to it and then exchanges brief messages.
- Page 9 Having entered your name and e-mail address, press ‘Next’. After saving these settings press ‘Next’ to move on. You will then be invited to send a test e-mail. Press ‘Send’ to send or ‘Skip’ to skip the test. If you choose to send then a test e-mail will be sent to your ‘From’ e-mail address.
- Page 10 Press the Bluetooth button on the Digidown Blue unit. Initially the blue LED will come on and then will start flashing slowly (about once every 2 – 3 seconds). Alternatively, insert a card into the Digidown CR unit and wait for the blue Bluetooth light to begin flashing.
- Page 11 SIM card in the phone. Some service providers have more than one access point – select the most appropriate. For more Lisle Design Ltd, New Technology Centre, information please North Haugh, St. Andrews KY16 9SR, Scotland contact Tel. +44 (0)1334 471435 Fax +44 (0)1334 471438 E-mail info@lisledesign.com Web www.lisledesign.com...
Need help?
Do you have a question about the Digidown CR and is the answer not in the manual?
Questions and answers