Sharp UX-340L Operation Manual page 49

Note: The following settings are not required as of the printing
of this manual. OpenLCR will inform you through its Web site
(www.OpenLCR.com) if the settings become necessary in the future.
Selecting a long or short call
Your fax needs to know
whether the call will be
long or short to route it
for the best rate.
1
LCR TABLE SELECT
1=02MIN, 2=04MIN
2
Setting Up and Using OpenLCR
FUNCTION
OpenLCR
Note: If the display shows
TABLE NOT EXIST, you must
first download the rate data.
SHORT LONG
1 2
or
47