Intended Use - Medical Devices Medlight 630PRO Instructions For Use Manual

Warranty Replacement Procedure
Below is the procedure for replacing your Medlight 630PRO unit due to
defect in workmanship or materials within the one (1) year warranty period:
1. The Medlight 630PRO device must be returned with copy of
original purchase receipt and in original product packaging.
2. Call Medical Devices Customer Service at (727) 451-7160. The
Customer service representative will provide you with a Return
Merchandise Authorization (RMA) number and a return address.
3. The return shipment must be prepaid and the RMA number must
be displayed on the outside of the shipping container or the
shipment will not be accepted by Medical Devices, Inc..
Returns not in the original packaging will not be honored under the terms
of this warranty.
Customer Service and Technical Support
For all Customer Service and Technical Support issues including
warranty
returns and replacement parts please contact our Customer Support
Department at:
Medical Devices, INC
Customer Service Department
th
4500 140 Ave. North
Suite 101
Clearwater, Florida 33762
Tel. (727) 451-7160
Fax. (727) 451-7199
e-mail:
info@mdevicesinc.com
web: www.mdevicesinc.com
The MedLightTM 630 Pro was manufactured in the USA under license
from Life Without Pain, LLC. All rights to the MedLightTM 630 Pro were
acquired by Medical Devices, Inc. Medical Devices, Inc. will provide all
product support and Warranty management for units sold by Medical
Devices Inc. or any of its authorized distributors or resellers.
MADE IN USA FDA CLEARED
9

Intended Use

Medlight 630PRO Pain Therapy Device is a hand held device used
for the treatment of chronic pain emitting energy in the Near-IR
spectrum for the temporary relief of minor muscle and joint pain,
arthritis and muscle spasm; relieving stiffness; promoting relaxa-
tion of muscle tissue; and to temporarily increase local blood circu-
lation.
Contraindications
There are no known contraindications for the use of the Medlight
630PRO.
Warnings
•
Keep the Medlight 630PRO out of reach of young children who are
not able to read and understand the 'Warnings' and 'Cautions'
listed below.
•
Do not allow device to come in contact with water; contact with wa-
ter may cause electric shock.
•
Do not use other Power Supplies or Car Adaptors with device. Using
other products may cause electrical shock or device failure.
•
Do not exceed three (3) treatment cycles per session. Ex-
ceeding treatment cycles may cause excessive skin warming. This
may result in skin irritation or discomfort.
Cautions
•
Do not block device fan vents by placing device under clothing, under
or betweens any body part(s) or with Velcro Strap. Blocking vent
may cause device to overheat and turn off.
•
Do not look directly at the light source. The Medlight 630PRO emits
high intensity light and prolonged exposure of your eyes directly to
the light may cause discomfort. Use of the supplied goggles is rec-
ommended during facial treatments to reduce the intensity of the light
to your eyes.
•
Do not allow the unit to come in contact with broken skin. The device
is not sterile and may cause infection. If necessary, cover the broken
skin with a bandage.
2