Advertisement
Connecting the UC 1500 via USB:
1. Use the USB cable to connect the UC 1500 to the computer using to the connector on the bottom of
the UC 1500.
2. For call control functionality of supported 3rd party applications on your computer, download and
install the FLX Device Manager from: https://uc.yamaha.com/resources/support/
Safety Warnings:
• Do not expose any of the UC 1500 components to water, moisture, or high
humidity.
• Do not expose any of the UC 1500 components to extreme high or low
temperatures.
• Do not expose any of the UC 1500 components to lit candles, cigarettes,
cigars, or to open flames.
• Do not drop, throw, or try to bend any of the components, as rough treatment
could damage them.
• Do not open the casings of any of the components of the UC 1500.
• Only use Revolabs original accessories intended for use with this product
• Use of non-Revolabs accessories may result in loss of performance, damage to the product, fire,
electric shock or injury. The warranty does not cover product failures that have been caused by use
of non-original accessories.
Manual, Firmware Upgrade, Troubleshooting, and Additional Configuration information is
available here https://uc.yamaha.com/resources/support/
Copyright 2018 Yamaha Unified Communications, Inc.
Advertisement
