Esc+K1 16X16 Dot Vertical Text Flow Kanji (Valid Specification Of Jis Or Shift Jis) - SATO LC400e Series Programming Reference Manual

8.15 Font
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se
8.15 ESC+k1 16X16 dot Vertical Text Flow
16 x 16 dot Vertical Text Flow Kanji
Kanji (Valid Specification of JIS or Shift JIS)
(Valid Specification of JIS or Shift JIS)
ESC
HEX Code
<1B>
16
Defualt Value NIL
Valid Range & When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify vertical text flow kanji at width 16 X height 16 dot.
[Format]
<k1>an~n
● Parameter
a {Kanji Specification Code}
n {Data}
[Coding Example 1] HEX Character Specification of Shift JIS, horizontal direction ratio:3 times, vertical direction ratio:5 times
<A>
<V>100<H>200<P>2<L>0305
<k1>H81698A94816A83548367815B
<Q>2
<Z>
[Coding Example 2] JIS Binary Specification, horizontal direction ratio:2 times, vertical direction ratio:3 times
<A>
<V>100<H>200<P>2<L>0203
<k1>B!J3t!K%5%H!<
<Q>2
<Z>
[Supplementary Explanation]
1.HEX Character
2.Binary Code
3.Smoothing Function Valid Ratio
4.Highlight Fucntion Valid Ratio
[Point]
1.For the highlighting function, the horizontal width of characters increase if follow the enlargement specification.
2.If highlighting function is used, be aware as there might have smearing problem occurs due to the characters.
3.This command can be used only when option Kanji ROM is installed.
[Valid Command]
Print Position
<V>
Modification
<P>
M-8400RVe CL608e/612e
M-84Pro-2/3/6
k1 Parameter
<6B> <31> an~n
16 16
The set parameter is not maintained
The set parameter becomes invalid
The set parameter becomes invalid
= H : HEX Character Specification
B : Binary Code Specification
I : with smoothing function based on HEX
C : with smoothing function based on binary code
J : with highlighting function base on HEX
D : with highlighting function based on binary code
K : with smoothing and highlighting function based on HEX
E : with smoothing and highlighting function based on binary code
= Refer to JIS Kanji Code Table or Shift JIS Kanji Code Table
= Kanji Code 4 byte ASCII/Kanji 1 character
= Kanji Code 2 byte/Kanji 1 character
= Horizontal, Vertical
= Horizontal, Vertical
<H>
<L> <%> <&>
M-5900RVe M-10e
LC408e/412e
ESC+k1
valid range : 3~12 times
valid range : 1~5 times
<WD>
</> <0>
74