Page 1
ALL IN ONE • OPERATIONS MANUAL • ASSEMBLY • CLEANING MOBIUSTRIMMER.COM...
Page 2
Academy. The following steps outline the process for operating your M108. You can also view videos of these steps on our website in the Check to see that all 3 variable speed knobs are pressed in and turned all the If using conveyors, place your conveyor sensor override pucks on the bumpers.*...
Page 3
All previous settings will resume. Turn the separator fan / tri-flex blades / tumbler on by pulling out each knob and When the Trim Tote is full, the Mobius will automatically shut off and the working adjusting to desired setting.
Page 4
ASSEMBLY Disassembly and assembly of the Mobius Trimmer M108 is easy, and requires no tools. Follow along in this step by step document as we show you how it’s done. Notice the holes on the top of the fan housing assembly. These correspond to the A good tip here- brace the Trim Tote with your knee while you pull up on the levers to lock it into place.
Page 5
ASSEMBLY Replace the first blue tumbler retaining ring. A tip: pull the tumbler towards you with Next replace the helical blades. The gear side of the helical blades will fit the gear your fingers on the inside, while rotating the bracket with your thumbs. side of the machine.
Page 6
Mobius Academy training site. Pop the screens back into place on the front and back of the M108. - 5 - mobiu str imm er.com i nfo@ m obiust ri m me r. com...
Page 7
CLEANING The following steps outline the process for disassembling and cleaning the M108. Remove each of the items in the following order. Refer to Assembly instructions for tips on removal. You can also view videos of these steps on our website in the Mobius Academy.
Page 8
Remove the separator, trim tote and fan housing and spray with diluted degreaser. Let sit for about 15 minutes. • While the removable parts are soaking, wipe down the Mobius body with degreaser, followed by a water wipe. • Rinse the removable parts with a pressure washer. DO NOT pressure wash the body of the Mobius.
Need help?
Do you have a question about the m108 and is the answer not in the manual?
Questions and answers