Advertisement
Installing the product
Installing the Multi Tenant Function Controller box
f The size of the Multi Tenant Function Controller box should be more than 210 mm(W) x 130 mm(H) x 100 mm(D).
f
f Fix the plate (PD, MD) to the Multi Tenant Function Controller box and assemble the holders (for fixing PBA) to install the
f
Multi Tenant Function Controller.
- Make 4 holes to fix PBA on the plate.
❋ ❋ HOLE SIZE : 5 mm diameter
Plate
4 PBA holder
holes
50 mm
or more
The installation location of Multi Tenant Function Controller box
f For ceiling type indoor unit, the distance between an indoor unit and the Multi Tenant Function Controller box should be
f
within 3 m.
❋ ❋ When the Multi Tenant Function Controller is installed, the Multi Tenant Function Controller box should be fixed.
f For wall-mounted indoor unit, the Multi Tenant Function Controller box should be concealed inside the wall and the
f
distance between an indoor unit and Multi Tenant Function Controller box should be within 3 m.
For ceiling type: 1 WAY CASSETTE, 4 WAY CASSETTE and DUCT
For wall-mounted type
Wall
6
보조전원 모듈_MCM-C210_IM_EN+FR_03929A-06.indd 6
100 mm
85 mm
Close the gap completely to prevent
rodents or water from entering.
HOLDER 4EA
110 mm
MTFC
50 mm
or more
Indoor Unit
Within 3 m
Indoor
Unit
Multi Tenant Function
Controller box
Within
3 m
W
D
Multi Tenant Function
Controller box
H
2016-04-21 오후 3:30:10
Advertisement
