Troubleshooting - Haws 7610 Installation, Operation & Maintenance Instructions Manual

PROBLEM
1. No flow.
2. Insufficient water flow.
3. Eyewash stream does not meet
desired eye level.
For more information about Haws products, see our website:
®
Corporation – All Rights Reserved
© 2018 Haws
®
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
08/18

TROUBLESHOOTING

REPAIR CHECKLIST
1. Check the main shut-off valve.
2. a. Verify minimum 30 psi (2 ATM)
flowing supply line pressure.
b. Probable clogging of flow control due
to inadequate line flushing. Unscrew
eye/face wash head and remove the
four screws to disassemble head.
Clean flow control and reassemble
head.
3. a. Possible blocked flow control, see
above solution.
b. Possible non-leveled eyewash
assembly.
Model 7610
www.hawsco.com
Page 3 of 7