The ClassBuddy™ Trolley Range - User Manual Contents Page No Section Title Section No Introduction Important actions Moving your trolley Getting started Charge only - set up 8 - 10 Charge and sync - set up 10 - 11 ClassBuddy™ options...
The ClassBuddy™ Trolley Range - User Manual 1. Introduction Congratulations and thank you for purchasing a storage and charging trolley from the LapSafe® ClassBuddy™ range. Your trolley comes with a life time parts and (Section labour warranty which you will need to activate immediately This manual has been designed to assist and guide you with the set-up and correct use of your trolley.
The ClassBuddy™ Trolley Range - User Manual 3. Moving your trolley Your ClassBuddy™ trolley should always be moved with care. Before moving the trolley the following checks/actions should be carried out, irrespective of the distance travelled: • Check that the power has been turned off at the wall socket.
With your ClassBuddy™ in its working position, the mains lead can be fitted into the mains socket at the rear of the right side of the cabinet and taken to an available wall socket to be plugged in and switched on.
The ClassBuddy™ Trolley Range - User Manual 5. Charge only - set up If you purchased a trolley that uses USB for charging and syncing then this section Section 6 is not relevant to you, procceed to Please ensure the cabinet is unplugged when you are loading AC adaptors in the ClassBuddy™...
The ClassBuddy™ Trolley Range - User Manual 6. Charge and sync - set up Loading your devices The charging and synchronisation unit for your ClassBuddy™ is accessible (Figure through the rear door of the cabinet A charging / synchronisation connection must be made between your (Figure 6) ClassBuddy™...
Page 9
The ClassBuddy™ Trolley Range - User Manual Button modes The lights on the charge and sync unit explains which mode it is in; sync and charge, charge and sync or auto cycles: AMBER light off, GREEN light flashing slowly, and...
GREEN light blinking briefly = All connected devices have synchronised for the preset period. (Default is set to one hour, after which the ClassBuddy™ will return each device to charge status to maintain optimum readiness. From the ‘All Sync’ mode, pressing the black button again, returns the module to the default ‘Sync then Charge’...
• Do not leave trolleys in the view of a window for security • Do not try to modify the trolley in anyway without contacting LapSafe® first to check that it is safe to do so Copyright LapSafe® Self-Service Solutions...
INDEPENDENT testing house before sale. Full CE compliance, which includes the requirements of LVD and EMC directives, is a STANDARD FEATURE of any solution manufactured by LapSafe®, as are many more built in safety features. CE Marking can be found on the product serial number plate, usually at the lower rear of the cabinet.
CE Testing, Conformity and Declaration of LapSafe® At LapSafe® we are proud to confirm that ALL of our electrical products, going back over ten years, have been thoroughly tested and certified (by an authorised and INDEPENDENT testing house) and accordingly have been clearly CE marked.
The ClassBuddy™ Trolley Range - User Manual EU Declaration of CE Conformity EU Declaration of CE Conformity to Council Directive 89/336/EEC Amendment 2004/108/EC & to Council Directive 73/23/EEC Amendment 2006/95/EC Equipment Description: Laptop Battery Charging Unit Device Name: LapSafe® ClassBuddy™ Range Manufacture Address: LapSafe®...
Page 16
The ClassBuddy™ Trolley Range - User Manual If you have any questions or problems Contact us today Copyright LapSafe® Self-Service Solutions...
Need help?
Do you have a question about the ClassBuddy and is the answer not in the manual?
Questions and answers