Lenovo A516 Service Manual page 38

Repair Manual of Lenovo A516 Mobile Phone
4) Assemble Three LCD conductive adhesive(8/30) and LCD Thermal
conductivity of graphite and LCD(3) to the Front Housing
Assembly(5). Watch out the Location of the Position Line;
5) Assemble The LCD buffer foam (2) to the TP component(1) by the
jig paste ;
6) The assembly hole of the senor module TP through the front shell,
the TP module (1) attached to the front housing corresponds to the
position of the sinking platform
7) Fix Receiver (16) and P-sensor silica gel(7) to the Front Housing
Assembly too;
REMARK: All units of the Front Housing Assembly have been
8) Fix Front camera to Front Housing; Fix Main FPC and Cable Line to
Main PCB; Assemble Main PCB(5) to the Front Housing Assembly,
and fasten them by five PCS Screws(27);Fix TP FPC and LCD FPC
and Front Camera and Back Camera to Main PCB;
9) Fix Main FPC to Front Housing Assemble;
10) Fix Loudspeaker Seal Foam(35) and Sub PCB Conductive
Adhesives and Speaker Conductive to Sub PCB Assembly; Fix MIC
Silicone Case to MIC;
11) Fix Main PFC(32) to Sub PCB Assembly, Fix Assemble PCB to
the Front Housing Assembly;
;
assembled already.
38