Dishwasher Specifications - Maytag MDB series Service Manual

GENERAL INFORMATION
Line Voltage/Frequency :
Amps :
Low Volts Power Supply :
Supply Water Flow Rate :
Supply Water Temperature :
Water Charge :
Control :
Wash Motor :
Drain Motor :
Fill Valve :
Heater :
Dispenser :
AC Fan Motor :
DC Fan Motor :
Vent Wax Motor :
Power Blast Wax Motor :
Sensors :
Switches :
TCO/Bi-Metal :
Fuse :
Wash System :
Lower Spray Arm Rotation :
Upper Spray Arm Rotation :
Filtration :
PowerBlast
Depth :
Height :
Width :
Weight :
1-8 Maytag Chopper Dishwashers
n

Dishwasher Specifications

-5 VDC (REF), 13 VDC (+8V, -5V), Neutral (VCC)
To fill 2 qt (1.9 L) in 27 seconds, 120 psi maximum, 20 psi minimum
120 VAC, Run Winding (3-7 W), Aux Winding (6-12 W)
Incorporated into Control Board (Penninsula Slots)
24 3/4" (62.86 cm) without handles, 27 1/2" (69.85 cm) with handles
34 1/2" (87.63 cm) max., 33 1/2 (85.09 cm) min.
120 VAC/60 Hz
15A
Minimum - 120° F (49° C)
1.58 gal. (6.0 L) Approximate
Electronic Control
120 VAC (15-60 W)
120 VAC, (890-1,090 W)
120 VAC, (8-30 W)
Solenoid: 120 VAC, (260-300 W)
Wax Motor: 120 VAC, (1.4K-3.0K W)
120 VAC, (60-80 W) (some models)
5 VDC, (31K-41K W)
120 VAC, (600-1,800 W)
120 VAC, (600-1,800 W)
NTC Thermistor
Water Sensor (OWI)
Door Switch (13 VDC)
Float Switch (120 VAC)
F9 = Small Triac Load Fuse
Maintenance Free Hard Food Disposer
12 to 40 rpm
12 to 30 rpm
4-Blade Stainless Steel Chopper
Available on all models
23 7/8" (60.64 cm)
102 lbs. (46.27 kg)