Do you have a question about the 3200 and is the answer not in the manual?
Questions and answers
Lance Obst
March 20, 2025
I press the reset button but it does not reset and the light stays red. What else could it be?
1 comments:
Mr. Anderson
March 20, 2025
The Waterwise 3200 may not reset and could keep the light red after pressing the reset button due to the following reasons:
1. Overheating Protection – If the unit was recently used, it may need to cool down before resetting. 2. Improper Kettle Placement – Ensure the kettle is properly placed and firmly pressed into the base unit. 3. Power Issues – Check if the power cord is securely plugged into a grounded 120-volt outlet. 4. Faulty Reset Button – The reset button may not be properly engaged; try pressing it again firmly. 5. Internal Malfunction – If none of the above solutions work, the unit may have an internal issue requiring maintenance or replacement.
This answer is automatically generated
Summary of Contents for Waterwise 3200
Page 1
Countertop Distillation System See important safeguards on pages 2, 3 and 4 An exclamation point within an equilateral triangle is intended to alert user to the presence of important operating, safety and maintainance instructions in the literature accompanying the appliance. A lightning bolt within an equilateral triangle is intended to alert user to risk of injury from electric shock.
Warn others of possible risks. • DO NOT attempt to remove kettle lid during a cycle as scalding may occur. (Additional information on page 7—“Using the Waterwise 3200 Distiller”). • DO NOT remove kettle while Distiller is operating or cooling. Wait at least 30 minutes after the completed cycle before removing kettle or cover.
Page 3
3. To prevent electric shock, injury or fire, a grounded extension cord must be rated at least as great as the electrical rating shown on bottom of the Distiller (800 watts and 10 amps). The longer cord should be Waterwise 3200 Use & Care Guide...
VOCs (volatile organic compounds), and is then collected in the Tritan™ collector/serving carafe which is Bisphenol-A (BPA) free Tritan™ is a Trademark of Eastman Chemical Company Waterwise 3200 Use & Care Guide...
1. Remove carafe from base unit and remove lid. 2. Pull tab on bottom of lid to release carbon compartment cover (fig. B). 3. Wash carafe and cover with soap and warm water. 4. Rinse thoroughly. Waterwise 3200 Use & Care Guide...
1. Be sure carbon is evenly distributed within bag, then place bag in filter compartment (fig. B). 2. Replace cover on compartment and place lid on carafe. 3. Discard first gallon of distilled water as it may contain some harmless matter from manufacturing and/or packaging. Waterwise 3200 Use & Care Guide...
Page 7
9. To pour water from carafe, open spout by pulling on center strip in direction of arrow indicator near thumb position. 10. Purified, distilled water may be stored in carafe in the refrigerator, if preferred. Waterwise 3200 Use & Care Guide...
6 for instructions). Discard first gallon of distilled water as it may contain small, harmless carbon fines. Order replacement filters from the source where you purchased your Distiller, or from waterwise.com. You can record replacement dates on page 11.
6. Cooling fan not working. REPLACEMENT PARTS & ACCESSORIES Description Part # 1 Gallon Collection/Serving Carafe 3250 Carbon Filter Replacement Single 8601 Carbon Filter Replacement 6 Pack 8606 Kettle Gasket 8646 Kleenwise Cleaner/Descaler 40oz Jar 1003 Waterwise 3200 Use & Care Guide...
Page 10
Healthy Fish… keep aquariums clean, clear and chlorine-free Happy Plants… eliminates brown foliage tips and flower pot salt deposits… plus longer-lasting blooms Waterwise 3200 Distillation System Waterwise 3200 Use & Care Guide...
Page 11
Serial Number Date Purchased Purchased From FILTER REPLACED:...
(scan the QR Code) Registration will not affect warranty coverage, but may expedite processing of your warranty. Registration is the only way to assure you will be notified by Waterwise if any issues arise concerning this product.
Need help?
Do you have a question about the 3200 and is the answer not in the manual?
Questions and answers
I press the reset button but it does not reset and the light stays red. What else could it be?
The Waterwise 3200 may not reset and could keep the light red after pressing the reset button due to the following reasons:
1. Overheating Protection – If the unit was recently used, it may need to cool down before resetting.
2. Improper Kettle Placement – Ensure the kettle is properly placed and firmly pressed into the base unit.
3. Power Issues – Check if the power cord is securely plugged into a grounded 120-volt outlet.
4. Faulty Reset Button – The reset button may not be properly engaged; try pressing it again firmly.
5. Internal Malfunction – If none of the above solutions work, the unit may have an internal issue requiring maintenance or replacement.
This answer is automatically generated