Beko Plasma TV User Manual page 3

• Signal Inputs
Always shut down the plasma screen and signal
supply before establishing any connections
between two devices.
• Disorders
In case there is any damage in the mains lead or
the device, remove the power lead from the socket
immediately. Under no circumstances do you
dismantle and/or rapair the device by yourself.
Instead, contact our Service Support Line or
another professional workshop.
• Batteries
When swallowed, the batteries pose fatal danger.
Therefore, you should keep the batteries away
from the reach of little children. If a batter is
swallowed, immediately seek medical assistance.
Immediately remove the used up batteries from
the remote control since they may leak and
consequently cause damage.
The batteries supplied with the device should not
be recharged or utilized in any other way, be
divided into pieces, thrown into fire or shorted.
DISCONNECT THE TV COMPLETELY, SHUT OFF
THE NETWORK OUTLET AND REMOVE THE
MAINS LEAD.
Used up batteries should not be disposed of with the
normal household waste. Batteries should be
disposed of in waste collection points designed for
this purpose.
• Cleaning and Maintenance
Switch odd the device before cleaning and remove
the mains lead from the socket. Wait for a few
minutes for the capasitors in the device to
discharge. Use a soft damp cloth for cleaning.
You should avoid chemical solutions and cleaning
agents, since they will damage the surfaces.
• The plasma screen creates internal high voltage
for gas discharge. Power off during installation,
maintenance and repair and disconnect the power
cable from the plug. Wait for a few minutes for
the capasitors in the device to discharge.
• In case foreign substances such as water, fluids,
metal fragments, etc. enters into the device,
immediately disconnect the mains lead. Never
attempt to touch anything in the device with any
object. There is the danger of electric shock or
accident.
• If an odd smell is emitted or abnormal noises are
heard from the device, immediately disconnect
the mains lead. If the no image is displayed in
the screen after switching on or during use, do
the same. In such a case, never attempt to
continue operating the screen.
• In case of long terms of disuse or thunderstorm,
pull out the mains lead from the socket the antenna
plug from the antenna socket.
• Never connect or disconnect the mains lead with
your hands wet. Never switch on the network key
with wet hands.
• Only use the supplied mains lead. Protect it against
any damages and do not make any modifications
on it. Never use a damaged mains lead.
• The plasma screen has a glass surface. In case
the device is exposed to overload (e.g. shake,
vibration, twist or heat shock), the glass surface
may get broken. Do not expose the glass surface
to any pressure or shake. In case the glass gets
broken, disconnect the mains lead and do not
touch the glass with naked hands.
• When switched to stand-by mode, the plasma
screen remains connected to the network.
To cut the connection completely, you should
switch the network key to 0 position or pull out
the mains lead from the plug.
• For ergonomic reasons, it is recommended that
you avoid using red or blue fonts or symbols on
dark backgrounds. Such an image may cause
illegibility due to low contrast and tires the eyes
early. Therefore, use high contrast images like
black font on white background.
• Pay attention to loudspeaker output technical data
during the connection of external speakers. In
case the loudspeakers are wrong-sized, the
loudspeaker and/or internal amplifier may be
damaged.
• Now, the unnecessary packs and packaging
sources are recyclable and must always be
recycled.
• Place the cardboard vertically, bottom side on a
firm ground. You may recognize the upper part
from the direction of the arrows on the longitudinal
side.
• Plasma screen may only be mounted on the
vertical (upright) walls with the assembling unit.
Make sure that the screen is switched off and the
mains lead and signal cable have been
disconencted from their plugs.
The background should be firm and of a structure
to carry the load. Material suitable for different
wall superstructures such as wooden walls or
empty walls should be used. If you have any
doubt, contact your authorized sales or service
department.
ENGLISH -5-