Understanding The Splitter / Receiver Status Lights; Edid Control - Bluestream HSP14CS Quick Reference Manual

Understanding the Splitter / Receiver status lights

The Blustream splitter and HDBaseT™ extender solutions include status LED indicators on both the splitter and receiver products
to show all connections are active and to help diagnose possible problems.
Understanding the status lights:-
Blustream HSP14CS splitter:
• The Yellow HDBaseT™ status link light will be off when the zone output has been turned off or there is a problem with the specific
splitter output.
• The Yellow HDBaseT™ status link light will blink when the zone output is on and working
• The Green HDBaseT™ link light will blink if there is an unstable connection between the Blustream splitter and HDBaseT™
receiver
• The Green HDBaseT™ link light will be lit when there is an active HDBaseT™ receiver connected to the splitter
• The Green HDBaseT™ link light will be off when there is no connection with a HDBaseT™ receiver
Blustream HDBaseT™ receiver:
• The HDMI link light will be off when there is no connection with a display
• The HDMI link light will be on when there is an active connection with a display (NOTE - Not all HDBaseT™ RX feature a HDMI
status LED)
• The HDBaseT™ link light will be off when there is no CAT cable/active HDBaseT™ connection on the RJ45 HDBaseT input
• The HDBaseT™ link light will blink if there is an unstable connection between the Blustream splitter and HDBaseT™ receiver
• The HDBaseT™ link light will be lit when a CAT cable is connected to the HDBaseT™ RJ45 output on the splitter and an active
connection is achieved with the Blustream HDBaseT™ receiver.

EDID Control

EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by
the source to find out what audio and video resolutions are supported by the display. By pre-determining the video resolution and
audio format of the source and display device you can reduce the time need for EDID hand shaking thus making switching quicker
and more reliable.
Configuration of HSP14CS splitter EDID settings is achieved by
Global EDID settings
Dip-switch position '0' = Off
Dip-switch position '1' = On
03
using EDID dip-switches located on the rear of the splitter -
DIP ON ▼/OFF▲ SWITCHING POSITIONS
3 2 1
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF ON ON
OFF ON ON
ON OFF OFF
ON OFF OFF
ON OFF ON
ON OFF ON
ON ON OFF
ON ON OFF
ON ON ON
ON ON ON
HSP14CS
0
EDID TYPE
OFF 1080p/2.0
ON 1080p/5.1
OFF 1080p/7.1
ON 1080i/2.0
OFF 1080i/5.1
ON 1080i/7.1
OFF 4K60Hz 4:2:0/4K30Hz 4:4:4/2.0
ON 4K60Hz 4:2:0/4K30Hz 4:4:4/5.1
OFF 4K60Hz 4:2:0/4K30Hz 4:4:4/7.1
ON 4K60Hz 4:4:4/2.0
OFF 4K60Hz 4:4:4/5.1
ON 4K60Hz 4:4:4/7.1
OFF DVI 1280x1024
ON DVI 1920x1080
OFF DVI 1920x1200
ON Copy Display EDID
QUICK REFERENCE GUIDE
See below
www.blustream.co.uk