Whalen XL-44 Manual
  1. Manuals
  2. Brands
  3. Whalen Manuals
  4. Racks & Stands
  5. XL-44
  6. Manual

Whalen XL-44 Manual

3-in-1 tv stand
Hide thumbs Also See for XL-44:
Table of Contents

Advertisement

Quick Links

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs.
DO NOT discard any of the hardware or parts that you will not use on your chosen option. This will
allow you to use this TV Console in different configurations at a later date, if desired.
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to
the store where it was purchased. Please call our customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
3-in-1
Model # XL-44 / XL-44E
U.S. Patent 8,561,551
CA Patent 2,811,974
ADULT ASSEMBLY REQUIRED
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2017-06-23 Rev. 0001-B Factory: FOCIDI
TM
TV Stand
866-942-5362
LOT NUMBER:
DATE PURCHASED:
/
/

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XL-44 and is the answer not in the manual?

Questions and answers

Related Manuals for Whalen XL-44

Summary of Contents for Whalen XL-44

  • Page 1 LOT NUMBER: DATE PURCHASED: 3-in-1 TV Stand Model # XL-44 / XL-44E U.S. Patent 8,561,551 CA Patent 2,811,974 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option. This will allow you to use this TV Console in different configurations at a later date, if desired.
  • Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: 3-in-1 TV Stand MODEL # XL-44 / XL-44E MADE IN CHINA RECOMMENDED FLAT PANEL TV RANGE: 94 cm / 37” –177.8 cm / 70”...
  • Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A-Top Shelf Frame (Qty. 1) B- Middle Shelf Frame (Qty. 1) C- Bottom Shelf Frame (Qty. 1) D- Spine (Qty.
  • Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. (6) 2-1/2” Bolt (7) Lock Washer (8) Flat Washer (9) Flange Nut (Qty. 1+1 extra) (Qty. 17+1 extra) (Qty.
  • Page 5 Assembly Instructions 5/8” Bolt (2 used in this step) ③ Flat Washer 1” Bolt Lock Washer (2 used in this step) (4 used in this step) (2 used in this step) ⑧ ④ ⑦ NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
  • Page 6 Assembly Instructions 1” Bolt (6 used in this step) ④ 1-1/4” Bolt (4 used in this step) ⑤ Flat Washer Lock Washer (4 used in this step) (4 used in this step) ⑧ ⑦ 5. Align and attach the Left Leg (E) to Top Shelf Frame (A) by threading two 1-1/4” Bolts (5) with the Washers (7 and 8) from inside the shelf frame through the drilled holes on side rail and screw into the threaded sockets on the Leg.
  • Page 7 Assembly Instructions for Table-top Console 9. Remove the Upper Spine from the assembled unit by unscrewing the four bolts and four washers at the back of the Top Shelf Frame (A) as shown. NOTE: Keep the bolts and the washers for the future used.
  • Page 8 Assembly Instructions for Table-top Console Lock Washer 2-1/2” Bolt Flat Washer (1 used in this step) (1 used in this step) (1 used in this step) ⑥ ⑦ ⑧ Spine End Cap Flange Nut (1 used in this step) (1 used in this step) ⑬...
  • Page 9 Assembly Instructions for Table-top Console 5/8” Bolt (4 used in this step) ③ 12. Attach 2 Cable Wheels (M) to the backside of Lower Spine (D) with the 5/8” Bolts (3). Tighten the bolts with the enclosed 4 mm hex wrench. NOTE: You can use the Cable Wheels to help keep your entertainment center’s cables and cords organized.
  • Page 10 Assembly Instructions for Table-top Console G/H/I A/B/C Suction Cup (18 used in this step) ① 13. Put the Suction Cups (1) firmly into the top holes and the inside metal tabs on 3 Shelf Frames (A, B and C) as shown. TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench while twisting it clockwise into the hole.
  • Page 11 Assembly Instructions for Table-top Console Tools required: Hex wrench (provided), Phillips screwdriver, mallet, power drill, and 3/8” drill bit. 15. Position the assembled unit at the desired location against a wall. If necessary, adjust the pre- attached Floor Levelers at the bottom of both Legs (E and F) to level the unit. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraint to the spine and the wall.
  • Page 12 Assembly Instructions for Floating Swivel Mount 5/8” Bolt Lock Washer Flat Washer (6 used in this step) (6 used in this step) (6 used in this step) ⑦ ③ ⑧ 17. Fasten the Swiveling Bracket (J) to the top of the Spine (D) with six 5/8” Bolts (3) and six Washers (7 and 8).
  • Page 13 Assembly Instructions for Floating Swivel Mount BACK 1/2” Bolt Lock Washer Flat Washer (4 used in this step) (4 used in this step) (4 used in this step) ⑦ ② ⑧ 18. Hold and attach the flat side of the Mounting Frame (K) onto the Swiveling Bracket (J) with four 1/2”...
  • Page 14 Mounting the Monitor Brackets to a television with a Flat Back NOTE: For televisions with a curved or recessed back, proceed directly to next page. 19. Determine the correct diameter of the Bolt the TV requires by hand threading them into the threaded insert on the back of the TV.
  • Page 15 Mounting the Monitor Brackets to a television with a Curved/Recess Back 21. Determine the correct diameter of the Bolt the TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If you are unable to find the correct Bolt consult a local hardware store.
  • Page 16 Assembly Instructions for Floating Swivel Mount LL/LR LL/LR MAKE SURE ALL BOLTS ARE TIGHT AND THE SPINE IS AT A 90 DEGREE ANGLE AND VERIFY THE MOUNTING FRAME IS LEVEL, USING A QUALITY LEVEL, PRIOR TO INSTALLATION OF TV. 23. Ask for assistance to lift the television up to hang the Monitor Brackets (LL/LR) onto the Mounting Frame (K).
  • Page 17 Assembly Instructions for Floating Swivel Mount 25. The Monitor Brackets (LL/LR) can tilt up to 11˚ downward and 5˚ upward, depending on your optimum viewing position. Keep the enclosed 3/16” hex wrench to ensure the tilt adjustment knobs remain tightly fastened.
  • Page 18 Assembly Instructions for Floating Swivel Mount 5/8” Bolt (4 used in this step) ③ 26. Attach 2 Cable Wheels (M) to the backside of the Spine (D) with the 5/8” Bolts (3). Tighten the bolts with the enclosed 4 mm hex wrench. NOTE: You can use the Cable Wheels to help keep your entertainment center’s cables and cords organized.
  • Page 19 Assembly Instructions for Floating Swivel Mount G/H/I A/B/C Suction Cup (18 used in this step) ① 27. Put the Suction Cups (1) firmly into the top holes and the inside metal tabs on 3 Shelf Frames (A, B and C) as shown. 28.
  • Page 20 Assembly Instructions for Floating Swivel Mount Tools required: Hex wrench (provided), Phillips screwdriver, mallet, power drill, and 3/8” drill bit. 29. Carefully move the console and position it at the desired location against a wall. If necessary, adjust the pre-attached Floor Levelers at the bottom of the Legs (E and F) to level the unit. 30.
  • Page 21 The following steps are only for those who wish to mount their TV directly to the wall. If you have already mounted your TV to the Swinging Floater or plan to display your TV on the top surface of the Console, disregard the following steps. Assembly Instructions for Universal Wall Mount Installing the Mounting Frame onto a WOODEN STUD WALL 2.50"...
  • Page 22 Assembly Instruction for installing the Mounting Frame onto BRICK, SOLID CONCRETE OR CONCRETE BLOCK WALLS 2.50" (63 mm) Maximum weight 135 lb. (61.2 kg) Concrete Anchors should only be used for masonry mounting. NEVER use the wall anchors to mount the unit to drywall. NOTE: If you are mounting your TV to a wall with wooden studs, skip this section.
  • Page 23 Assembly Instructions 38. Attach the Monitor Brackets (LL/LR) to the back of the television following steps 19 and 20, or 21 and 22, depending on the type of TV that you own. 39. Once the Monitor Brackets (LL/LR) are attached onto the back of the television, ask for assistance to lift the television up to attach the Monitor Brackets onto the Mounting Frame (K).

  • Page 24: Care And Maintenance

    Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.

This manual is also suitable for:

Xl-44e

Table of Contents

Save PDF