Table of Contents
Advertisement
Resetting to Factory Defaults
There may be occasions when you need to reset your cable modem/router
to factory defaults, for example if you have changed the Username and
Password and lost the new values. Note that if you reset your device to its
factory defaults, you will lose any changes you have made to settings in the
device.
To reset to factory defaults:
1.
Make sure the cable modem/router is powered on.
2.
Find the reset button on the rear of the unit. It is marked RESET.
3.
Press and hold the Reset button for at least 10 seconds.
4.
The device will flash its LEDs and commence a reboot sequence.
Note that you will have to manually re-enter any required changes.
71
- Quick Links:
- Configuration Manager
- Wireless Router
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MT7711 and is the answer not in the manual?
Questions and answers
My modem will no longer connect to my wifi using 2.4G MOTO23EF
my phone doesn't work and the Tel-1 light on the modem is blinking yellow
The Tel1 light on the Motorola MT7711 modem may blink continuously if no telephone service is provisioned.
This answer is automatically generated
I've tried several times to access Configuration Manager MT7711 to open web browser to change name and password with no success. i enter admin motorola and it locks me out for wrong info. help
To access the Configuration Manager for the Motorola MT7711 and change the network name and password, follow these steps:
1. Open a web browser.
2. Type http://192.168.0.1 in the address bar and press Enter.
3. In the login dialog box, enter:
- User Name: admin
- Password: motorola
4. Click OK to log in.
5. The Basic Status and Settings page will appear.
6. To change the network name and password for the 5 GHz band:
- In the Wi-Fi Privacy Settings section, delete the old Network Name and enter a new one.
- Click the Save button.
- To check the typing for the password, click the Show Key box.
- Delete the old Password and enter a new one.
These steps allow you to modify the wireless settings of your MT7711.
This answer is automatically generated
How do I get the 2.4 ghz to work after a power outage?