Table of Contents
Advertisement
Examples
# Configure ISP domain test to use local authorization for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local
# Configure ISP domain test to use RADIUS scheme rd for authorization of portal users and use local
authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local
authorization ppp
Syntax
authorization ppp { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none | radius-scheme
radius-scheme-name [ local ] }
undo authorization ppp
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform any authorization exchange. In this case, an authenticated PPP user can access
the network directly.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a case-insensitive
string of 1 to 32 characters.
Description
Use the authorization ppp command to configure the authorization method for PPP users.
Use the undo authorization ppp command to restore the default.
By default, the default authorization method for the ISP domain is used for PPP users.
The specified RADIUS or HWTACACS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Related commands: local-user, authorization default, hwtacacs scheme, and radius scheme.
Examples
# Configure ISP domain test to use local authorization for PPP users.
<Sysname> system-view
[Sysname] domain test
68
Advertisement
Table of Contents
