Pre-set Dialing
Check the number in the display before pressing
ERASE
press
to clear the mistake and then enter the correct digits.
HOLD
Note: If a pause is needed between any of the digits to access an outside
line or a special service, press
Receiving a Phone Call
1
When the cordless handset rings, pick it up and press any key (except
SELECT
LINE
or
OFF
OFF
•
If the cordless handset is in the base, simply pick it up to answer (you do
not need to press a key).
2
When you are ready to end the call, press
•
You can also end the call by simply placing the cordless handset in the
base.
Putting a Call on Hold
To put the other party on hold during a call, press
resume the call, press
handset in the base while a call is on hold will break the connection.
You can also dial by entering the phone
number first and then pressing
PAUSE
REDIAL
) to answer. Talk to the other party.
once again. Note that placing the cordless
HOLD
Receiving a Phone Call
. If there is a mistake,
TALK
. The pause will appear as a hyphen (-).
.
OFF
OFF
. When you are ready to
HOLD
.
TALK
15