Advertisement
9. When the update is completed, the power automatically turns OFF / ON and the message "Update is
completed." is displayed. After the power is ON again, Status indicator is ON.
10. Select the "OK" button. (Touch the "OK" button.) The normal "Recording" mode screen is displayed.
< How to recover from irregular situations while updating >
Solutions are introduced against both Card Plug-Out and Power Interruption troubles to execute the update again.
Process
Data Readout from SD Card
Updating
(Update of Flash ROM Data)
3. Confirm the version number is renewed
Follow the procedure of "Step1", confirm the version number is renewed.
If it succeeded to update, the update file in the SD memory card is not need anymore.
Card Plug-Out
The process of Update is stopped.
Plug-Out is ignored.
Update is continued.
(because the update file data is
already transferred to the camera
recorder)
START
Start of Update
Completed
AG-FC100 Firmware Update Procedure / January 2017
The camera recorder starts up normally.
Restart from selection of "UPDATE"
At the power-on, the camera recorder
starts up in UPDATE mode. Update is
continued.
Page5/5
Power Interruption
Panasonic Corporation
Advertisement
