Philips 7.5ft Lighted Balsam Fir Quick Start Manual page 15

When music is playing and you use the back button on device or menu, music stops playing and
lights go dim.
This is normal operation of the set. When you use the back button on your device, or select the menu, while in
the music section, the music will stop playing, the lights will stop flashing to the music and the lights will stay in
the color and brightness state that they were in when you pushed that button. This may cause the lights to be
off, dim or bright depending what they were doing at that instant. Just select a different function for them to do
something different, or go back to the music screen, select your songs and hit play for the lights to start
sequencing to the music again.
App stops working
Restart app
Forgotten Password
Password Reveal
Note - This only works on the original smart device the control box was set up with.
1. Update App to newest version
2. Select menu icon on upper left and select "About"
3. Press and hold the Philips logo at the bottom of the screen
4. Password recovery menu will open. Press name of control box.
5. Password will be displayed for that control box.
Full Factory Reset
Note – If the tree is plugged in and unplugged several times within a fifteen minute period, the control box
may perform a factory reset.
1. Start with the control box unplugged from a 120V outlet (with the lights connected).
2. Plug in control box into a 120V outlet and wait 1-8 seconds*, then unplug it from the outlet.
3. Wait 3-5 seconds*, and plug it in again and wait for 1-8 seconds* and then unplug it.
4. Wait 3-5 seconds*, and plug it in again and wait for 1-8 seconds* and then unplug it.
5. Plug the control box back into a 120V outlet and the lights will begin to flash. This is an indication that the
control box is resetting.
6. When the lights stop flashing (about 15-30 seconds*), the control box has been reset to factory settings
and the password will return to the default password of 12345678.
7. To reconnect to the control box, please open your WiFi settings in your device and select the control box
SSID and enter 12345678 as the WiFi password (you may have to have the smart device forget the
control box SSID to enter the new password).
Note: that once full reset is complete, the control box will need to be programmed to the correct number of lights.
(See page 4 under If Sections is not working..)
*- Times may vary depending on last selected pattern and amount of lights connected to control box. For best
results disconnect all but on light string from control box while reset procedure is being completed.
Item #: 755712 & 758775
DPCI: 051 01 2039 & 051 01 3039
SAVE THESE INSTRUCTIONS
Page 6 of 7