Overmax CamRoad-6.1 User Manual page 13

The date / time is
incorrect
The suction cup
keeps
coming off
Can't see the
device in
my computer
No video
displayed on
TV
The captured
image is
not stored
None of the
buttons work
I cannot turn my
device
on
My screen keeps
turning off
I cannot take any
photos
Recording seems
to stop by itself
need to wait a few minutes.
Reset the date/time in the settings menu. If the
battery runs completely flat, then the date/time
needs to be reset.
Ensure the windscreen and surface area of the
suction cup is clean.
In wet or very hot weather, the suction cup
mount may need to be reapplied. Do not apply
the suction mount on the portion of a
windscreen which is not glass (eg; some
vehicles may have a coating)
Check the USB cable connection to the device
and USB port. Try another USB port, possibly
directly to the PC/notebook (rather than
through a USB hub).
- Check the cable connections and whether the
playback mode is selected on the Camera
- Check the AV input selection on the TV
Your Micro SD card might be full or the file may
not have been saved before the unit was
turned off. Make sure to stop recording before
shutting the device down.
Press the factory reset button.
Try charging the battery for 10 minutes and try
again. The battery may be completely
exhausted.
Try either charging the battery or adjusting the
screen saver settings.
Your Micro SD might be full. Try removing
some files.
Make sure you are using the right class SD