Installing The System Battery - Dell E43S Series Installation And Service Manual

Figure 38. Removing system battery
Next step
Install the system battery.

Installing the system battery

Prerequisites
WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or
equivalent type recommended by the manufacturer. For more information, see the safety information that shipped with your
system.
NOTE: Battery is a Field Replaceable Unit (FRU). Removal and installation procedures are to be performed only by Dell certified
service technicians.
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
Steps
1 Locate the battery socket. For more information, see
2 Hold the battery with the "+" facing up and slide it under the securing tabs.
3 Press the battery into the connector until it snaps into place.
Safety instructions.
Before working inside your
System board
system.
connectors.
Installing and removing system components 81