Adapting model dt to factory built and masonry chimneys (4 pages)
Summary of Contents for Selkirk DSP
Page 1
INSTALLATION. FAILURE TO INSTALL THIS SYSTEM IN ACCORDANCE WITH THESE INSTRUCTIONS WILL VOID THE CONDITIONS OF CERTIFICATION AND THE MANUFACTURERS WARRANTY . KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE USE. SELKIRK CANADA CORPORA SELKIRK CANADA CORPORA TION TION...
Page 2
1m (3ft). The following is to assist you in connecting the Double Wall Stove Pipe (DSP) to the Chimney system. There are two (2) All joints between sections of the chimney connector must be connecting methods.
Page 3
Chimney Pipe Adaptor. Ensure that it’s final position will be cov- ered by the Finishing Band which is only 3” wide. The Finishing Band must overlap the crimped end of the DSP and the bead to the beveled Finishing edge of the Chimney Pipe Adaptor or to the Basecap (see Figure 1A).
Page 4
sal Chimney Adaptor to the top of the Tee. Secure the sections INSTALLATION TYPE #1 (See Figure A) together with the 3 metal screws supplied ensuring that the elbow This installation is used when the chimney system is located is properly aligned for connection to the Telescopic Length. See immediately above the appliance.
Page 5
Do not use fuel materials corrosive to the chimney such as driftwood, chemically treated wood or garbage or over fire your solid fuel appliance. This can cause failure of the DSP Double Wall Stove Pipe and will void any warranties.
Page 6
LIMITED LIFETIME WARRANTY: Selkirk Canada Corporation, ( “we”, “us”, “our”) warrants Chimney & Venting products * to be free from defects in material and workmanship for as long as the original consumer owns the system. For products installed after January 1, 2000, for a period of Ten (10) years from original installation, we will provide replacement product with a similar or like quality of available product, free of charge excluding any installation costs.
Page 7
INSTALLATION INFORMATION keep in safe place for future reference MODEL OF CHIMNEY: _______________________________ TYPE OF APPLIANCE: ______________________________ INSTALLATION DATE: ____________________________ DESCRIPTION OF INSTALLATION (Chimney and Chimney Connector configuration) ______________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ PURCHASED FROM: DEALER NAME: _________________________________________________ Address: _________________________________________________ City: _________________________________________________ Province/State: _________________________________________________ INSTALLED BY:...
Need help?
Do you have a question about the DSP and is the answer not in the manual?
Questions and answers