Related Manuals for UnderCover 1010
Summary of Contents for UnderCover 1010
- Page 1 TONNEAU INSTALLATION GUIDE Warranty, Care & Maintenance Model 1010 Chevy Silverado, GMC Sierra 1999 – Current EASY AS 1-2-3! NORMAL INSTALLATION TIME MINUTES FORM # IG1010 Modified April 2005 (866) 900-8800 www.undercoverinfo.com...
-
Page 2: Pre-Installation Notes
Be sure to use only cleaners, waxes, etc., which are labeled Ò safe for use on plastics”. Make sure that chemicals or substances, which are not labeled “safe for plastics”, do not come in contact with your Undercover. Failure to do so could cause discoloration and/or structural damage to your Undercover and will void your warranty. - Page 3 Note: If your Tonneau has already been installed, skip to Page 9 for removal and reinstall instructions. Off your truck and on your wall in less than one minute! FORM # IG1010 (866) 900-8800 www.undercoverinfo.com Modified April 2005 UnderCover makes tonneaus for most makes and models of trucks.
- Page 4 WARNING! Bolts must be tightened to the correct torque to prevent any movement of the bracket on the truck bed. Bolts must be re-checked for tightness periodically. Failure to do so could cause serious damage to both the truck and/or your Undercover. Repeat Steps A through C for opposite side of the truck bed.
- Page 5 TONNEAU INSTALLATION GUIDE Page 4 Model 1010 Chevy Silverado, GMC Sierra 1999–Current UNDERCOVER INSTALLATION INSTRUCTIONS Figure 1 TRUCK BED RAIL TOP VIEW TAIL GATE REAR BRACKET LOCK STRIKE TRUCK STAKE POCKET OR TAIL LIGHT WELL Figure 2 LOCK REAR STRIKE...
- Page 6 TONNEAU INSTALLATION GUIDE Page 5 Model 1010 Chevy Silverado, GMC Sierra 1999–Current EASY AS 1-2-3 UNDERCOVER INSTALLATION INSTRUCTIONS FACT: Undercover’s ABS-Composite material makes it the strongest and most durable tonneau on the market. Position the front bracket according to Page 6, Figure 4, Picture A. It is very important to review Page 6, Figure 4 for the proper gap distance to set the front brackets of your truck model.
- Page 7 TONNEAU INSTALLATION GUIDE Page 6 Model 1010 Chevy Silverado, GMC Sierra 1999–Current UNDERCOVER INSTALLATION INSTRUCTIONS Figure 4 TRUCK BED RAIL TOP VIEW 1/8”–Gap proper starting point for model 1010 Chevy/ FRONT BRACKET GMC Short Bed BULKHEAD 1999 – Current. Figure 5...
- Page 8 TONNEAU INSTALLATION GUIDE Page 7 Model 1010 Chevy Silverado, GMC Sierra 1999–Current EASY AS 1-2-3 UNDERCOVER INSTALLATION INSTRUCTIONS FACT: In less than one minute, you can both take on and off the Undercover tonneau. Fastest removal system in the industry.
- Page 9 TONNEAU INSTALLATION GUIDE Page 8 Model 1010 Chevy Silverado, GMC Sierra 1999–Current UNDERCOVER INSTALLATION INSTRUCTIONS Figure 7 HYDRAULIC STRUT (LARGE END) ATTACHES TO TONNEAU HYDRAULIC STRUT TRUCK BED RAIL (ROD END) REAR BRACKET Figure 8 UNDERCOVER TONNEAU FRONT FLAP SEAL...
- Page 10 TONNEAU INSTALLATION GUIDE Page 9 Model 1010 Chevy Silverado, GMC Sierra 1999–Current Congratulations! Your 30-minute installation job is now complete. Now, in less than one minute, you will be able to put on and take off your tonneau cover. UNDERCOVER REMOVAL & REINSTALATION INSTRUCTIONS...
- Page 11 TONNEAU INSTALLATION GUIDE Page 10 Model 1010 Chevy Silverado, GMC Sierra 1999–Current UNDERCOVER WALL HANGING INSTRUCTIONS Step 1 Prior to removing the 32” tonneau, mount the two J-Hooks provided on the garage wall. The hooks must have a minimum height from the floor of 70”, and be 32”...
- Page 12 TONNEAU INSTALLATION GUIDE Model 1010 Chevy Silverado, GMC Sierra 1999–Current UNDERCOVER SERIAL NUMBER LOCATION The Serial Number sticker is located on the left rear of the tonneau, just under the back overhang. THANK YOU! Congratulations! You’ve just installed the fastest-selling, highest-quality tonneau in the industry.
Need help?
Do you have a question about the 1010 and is the answer not in the manual?
Questions and answers