Big League Lawns CheckMate Installation Manual

Lawn striping kit

1161 E. Clark Road, Suite #220

DeWitt, MI 48820

800.411.0150

www.bigleaguelawns.com

CheckMate™ Lawn Striping Kit Installation Guide

Important

Big League Lawns, LLC warrants their products to be free of defects in material and workmanship.

This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear,

failure to properly maintain the product or used for a purpose other than that for which it is intended.

The duration of this warranty is expressly limited to one year parts and labor beginning from the date

of delivery to the original customer.

The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option,

at its factory or authorized repair agent of any part that should prove deficient. Purchaser must

maintain the product under normal operating conditions at all times. Prior to operation, become

familiar with the attachment and any disconnect features. This product is not intended to be used in a

transport position or to be backed over curbs. When not in use, the product should be removed from

the mower and transported in a safe manner. Failure to follow these instructions will void the

warranty.

Table of Contents

Need help?

Do you have a question about the CheckMate and is the answer not in the manual?

Page 1 The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option, at its factory or authorized repair agent of any part that should prove deficient. Purchaser must maintain the product under normal operating conditions at all times.
Page 2 Riding Mower / Frame Schematic Step 1: Identify existing utility cart hole located at the rear of the tractor.
Page 3 Step 2: Bolt Quick Release Adaptor Plate to Utility Cart Hole • Utilizing a 5/8” x 1 1/2” bolt and 5/8” flat washer, insert the bolt through the the flat washer and into the sliding notch of the tractor plate. •...
Page 4 Step 4: Remove Top Side 1/2” x 1” Bolts from Slide Rail Step 5: Attach Mounting Arms to CheckMate™ Striping Roller Using 1/2” x 1” bolts, attach mounting arms to the rectangular channel nuts located inside the channel. The channel nuts slide up and down the rail to allow for infinite connection points.
Page 5 Lawn & Garden Tractor Hardware Conﬁguration...