Preparing Cables - Samsung AceLink SAM-335A User Manual

Chapter 2
2-4
AceLink ADSL Modem Setup

Preparing cables

You must have all cables ready before connecting to the network. The
following cables are needed to connect the AceLink ADSL modem to the
network.
Port
ADSL/Telephone line port
(Line, Phone)
Ethernet port (10BASE-T)
Table 2-1 Cables used by AceLink ADSL modem
More detailed specification of each cable is described in
Appendix C "Cable Specifications".
RJ-11 cable
One end of the RJ-11 cable is connected to telephone line port (Phone) in
the back of the AceLink ADSL modem, and the other is connected to the
POTS micro-filter (LINE) which is provided separately. The specification of
RJ-11 cable should be 26AWG or higher.
Figure 2-1 RJ-11 telephone cable
Required cable
RJ-11 cables.
RJ-45 UTP Category-3,4,5 Straight-
through cable.