Venstar Explorer ACC-VWF2 Installation Instructions
  1. Manuals
  2. Brands
  3. Venstar Manuals
  4. Wireless Router
  5. Explorer ACC-VWF2
  6. Installation instructions

Venstar Explorer ACC-VWF2 Installation Instructions

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

OVERVIEW

This Wi-Fi module is intended to be installed in a compatible Explorer thermostat. Please consult Venstar.com for a complete
listing of compatible thermostats.
At minimum, the first 4 tasks of the 5 below must be successfully completed to access your thermostat remotely from a browser.
The 5th step is optional, although highly recommended, and is only needed to access your thermostat from a compatible
mobile device using the Skyport app.

THE 5 TASKS ARE:

1.
Installation of the module into a Explorer thermostat.
2.
Connection to a local Wi-Fi access point with Internet access. This is made easy with the help of the
Venstar Configurator app. (Downloaded from your mobile device's app store)
3.
Creation of a Skyport account with confirmation of a Skyport Messenger generated verification email.
4.
A 6-digit code obtained from the thermostat entered into a Skyport account.
5.
Download and install the Venstar Skyport app on your mobile device from your device's app store.

INSTALLATION OF THE MODULE

1.
Separate the front housing from the backplate of the thermostat.
2.
Install the Wi-Fi module as shown onto the printed circuit board.
®
by
Module Installation Instructions
Wi-Fi
Front Housing
3.
GAS
ELEC
O
B
GAS/EL
HP
model:
Backplate
Finger Pull Areas
Carefully press the front housing with installed
WiFi module back on to the backplate.
ACC-VWF2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Explorer ACC-VWF2 and is the answer not in the manual?

Questions and answers

Related Manuals for Venstar Explorer ACC-VWF2

Summary of Contents for Venstar Explorer ACC-VWF2

  • Page 1 Wi-Fi OVERVIEW This Wi-Fi module is intended to be installed in a compatible Explorer thermostat. Please consult Venstar.com for a complete listing of compatible thermostats. At minimum, the first 4 tasks of the 5 below must be successfully completed to access your thermostat remotely from a browser.
  • Page 2 After a successful connection to a local access point is completed, the entire Wi-Fi symbol appears on the display. This Wi-Fi module requires the Venstar Configurator App for setup. Please go to your mobile device’s App Store and download the Venstar Configurator App.
  • Page 3 Subsequent firmware releases may not be adequately depicted in this installation sheet. Please refer to www.venstar.com or contact your place of purchase to learn about changes that are incorporated into firmware releases. This module is compatible with most 2.4 GHz, Wi-Fi b/g/n band access points.

  • Page 4: Fcc Compliance Statement

    We, Venstar, declare under our sole responsibility that the device to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents