The original of this manual was written in German. All other languages are translations of this manual. Validity This manual applies only to the seat and accessories supplied by GREINER GmbH (also abbreviated to GREINER). Manufacturer GREINER GmbH Wettestraße 1...
Insert headrest correctly (see 4.3 Headrest adjustment) (without Fig.). Mounting the guide rails (option) The mounting of the optional guide rail set of the company GREINER GmbH is described here. Move the two guide rails to the mounting position as shown.
Page 6
The fixing of the seat is relevant to safety and must therefore be strictly observed. The standard screw set for fastening is matched to the optional guide rail set of GREINER GmbH. When fastening to other guide rails or directly to adapters or brackets, the minimum or maximum screw-in depth from the surface contour of the six screw-on points on the seat must be observed.
Mounting Mounting the armrests (option) The mounting of the optional armrests from GREINER GmbH is described here. Remove the top provisional fastening screw (I) of the backrest fitting. (galv. version - not polyamide coated). Do not remove both fastening screws of the backrest fitting at the same time.
Armrest adjustment (option) 4.11 LR Edition The scheel-mann LR Edition models are based on the basic models, but are specially optimized for installation in the Land Rover Defender ® . The foldable seat (approx. 90°) allows quick access to the on-board electronics.
Need help?
Do you have a question about the Scheel-mann and is the answer not in the manual?
Questions and answers