Function Summary - Boombeatz Garden Light Speaker Instructions For Use Manual

INSTRUCTION FOR USE
Charging Instructions
This Garden Light Bluetooth Speaker has a built in rechargeable battery.
Before using it for the first time we recommend you use the micro USB charging cable to charge the battery fully.
Connect the USB cable to a USB port or a USB wall charger (not included) and connect the micro USB into the
back of the speaker. The red battery charging LED indicator illuminates while the speaker is charging. When the
battery is fully charged, the red LED indicator will turn OFF.
Garden Light
Press the ON/OFF button to turn the flame LED light ON or OFF.
Pairing the Garden Light speaker with Bluetooth devices (phone or music device)
Hold the power button for about 3 seconds to turn the speaker ON and the Bluetooth mode will open automatically,
you will hear a "pairing" tone and the 4 buttons on the front of the speaker will flash.
Place the speaker and Bluetooth device (phone or music device) so that they are no further than 30 feet apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the
manufacturer's instructions on how to enable Bluetooth on your device.
Once you have activated Bluetooth on your device, select the pairing name " " from the list of available
GARDEN1
Bluetooth devices. If required, enter the password '0000' to confirm the pairing.
Once paired successfully, you will hear a "connected" tone indicating pairing successful.
You can now start to use the speaker.
Once you have paired the speaker with a device, the speaker will remember this device and will pair automatically
when the device's Bluetooth is activated and in range. You do not need to re-pair any previously connected devices.
The speaker will attempt to automatically connect to the last device it was paired with when the Bluetooth mode
turn on. If you want to pair it with a new device, please turn OFF your last Bluetooth device (phone or music device)
then use your new device to search and select the pairing name.
Once the speaker is paired with your device the music will transmit directly to the speaker. Please refer to your
device's user manual for further information.

Function Summary

Listening to Music
Once the speakers are paired with your device you can stream music wirelessly through the speaker. Select the
track you wish to listen to and it will be streamed to your Bluetooth speaker. Should you encounter any problems
while streaming please refer your device's user manual for further information.
Note: An indication tone will alert you when the volume is adjusted to the maximum level.