Description Of The Configurator; Home Screen; Quick Configuration - Vokkero GUARDIAN US User Manual

VOKKERO GUARDIAN US - User Guide V1.0.0

4. DESCRIPTION OF THE CONFIGURATOR

The configurator does not have an On-Off switch. To turn it on, the configurator must be connected to the power unit provided
with the VOKKERO Guardian. The configurator has a USB port for updates. The configurator screen is a high-resistance touchscreen.
The configurator can also be used to download products.
Immediately upon starting up the system, the configurator displays the VOKKERO logo, with the firmware version of the configu-
rator, followed by the Home Screen.

4.1. Home Screen

The screen indicates the number of terminals that the configurator can hold (each number corresponds to one terminal). The
configurator uses a color code to indicate the terminal's charging status or the battery's charging status, using the following
EN
code:
You can rapidly configure the entire system by selecting the ___ icon. Alternatively, you can fine-tune the system config-uration
by using the settings icon.
You can also proceed directly to the configuration of the terminal by selecting the desired terminal number.

4.2. Quick configuration

The terminals are delivered pre-configured and ready-to-use. With Quick Configuration, you can rapidly reconfigure all system
devices; with this option, any devices on the configurator/charger will be automatically reconfigured in one single action, and will
once again be ready-to-use.
The screen displays the channel that you have configured.
You can choose another channel from the list of channels available for your terminal; do this using the
Channel setting.
This channel is the terminal start-up channel; the other channels are available using the Channel button on
the terminal.
Start the configuration by selecting "GO" on the screen, and then validating the confirmation screen; the
configuration starts.
If the configuration completes successfully, the indication "DONE" displays. Alternatively, the indication
"ERROR" displays if a problem is encountered.
Empty space
Terminal in charge
Terminal loaded
Terminal battery fault
Battery in charge
Battery loaded
Battery in error
If red icon, then the
terminals placed on the
configurator have not been
correctly configured to
work together;
A "WI" icon displays
when you connect the WI
interface on the configu-
rator.
This system is optional.
20 / 32