Cleaning - Philips Series 5000 Safety Instructions

English
20

Cleaning

Cleaning the Shaving Unit
- Always clean your shaver after each use.
- Regular cleaning guarantees better shaving
results.
- Never remove or replace shaving unit while
motor is on.
- Do not apply pressure to shaving head combs.
Do not touch shaving heads with hard objects
as this may dent or damage precision-made
slotted combs.
- Do not use shaver if shaving head combs are
damaged or broken. Facial injury may occur.
- Do not use abrasives, scourers or aggressive
liquids such as gasoline or acetone to clean the
shaver.
- Never dry the shaving unit with a towel or tissue
as this may damage the shaving heads.
The shaving heads may be quickly cleaned after
each use by rinsing with hot water. Water from the
tap should be on a hot setting, BUT BE CAREFUL
TO TEST WATER FIRST SO AS NOT TO BURN OR
SCALD HANDS.
- Regular cleaning guarantees better shaving
results.
- While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence.
1 For best results rinse the shaving unit by
running under hot water for a few minutes.