Quick Start Reset Button Long press: to restart Short press: to stop the alarm White Lights Bluetooth Status LEDs on top Flashing: waiting for connection Solid: connected Warning Buzzer No warning when tire pressure is normal. Alarms sound when tire is in abnormal* status.
Smart Tire Safety Monitor features a USB-powered receiver with 4 internal sensors that transmit data via Bluetooth directly to the ZUS app. Showing the tire pressure of all 4 tires in real time, the monitor can quickly detect punctures and/or excess temperature, giving both a visual and audible warning to alert the driver of possible tire failure.
Connect the receiver to a USB car charger. Pair the receiver with your mobile device before installing the sensors. ENGINE START Search ‘ZUS’ on the Plug the receiver into Open the ZUS app, App Store or Google Play a USB port & start the click “add a device”...
Page 5
Tighten the valve by wrench Sensor assemble. and screw it. Adjust the angle of the sensor Install the tire from left side to make it fit closely to the rim, of the valve clockwise direction, then tighten up the screw on the avoid tire bead hits valve and sensor to fix it.
3. Deflate or inflate the problem tire for a little bit and see if you can get any updated readings from the Dashboard. You could also check the FAQ in the ZUS App for more information. If all the above mentioned procedures don’t work for you, please contact our customer service at cs@nodna.us.
Important Safety Instructions Do not place any open flame source near the devices. Avoid dropping the devices. Do not disassemble. Use of the Smart Tire Safety Monitor is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger the low tire pressure alert.
By sending the Device, consumer agrees to transfer ownership to nonda. nonda may not return the original device to consumer. If the claim is justified based on this Warranty, nonda shall bear the cost of shipping the repaired or replacement device to the Consumer.
How To Make A Warranty Claim Read through our warranty above; if you believe you are covered by the warranty please prepare following documents and send them to cs@nonda.us. 1. A copy or screenshot of the original purchase invoice to verify your warranty ( order id, purchase date, website or store) 2.
Page 12
Receiver NCC ID: CCAK17LP1490T2 NCC Statement Sensor NCC ID: CCAK17LP1480T2 Administrative Regulations on Low Power Radio Waves Radiated Devices warning: Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequen- cy devices.
Need help?
Do you have a question about the ZUS and is the answer not in the manual?
Questions and answers