Tips For Saving Energy; Initial Operation; Settings Menu; Setting The Clock - Blomberg BGR30420SS User Manual

Hide thumbs Also See for BGR30420SS:
Table of Contents

Advertisement

Tips for saving energy
The following information will help you to use
your appliance in an ecological way, and to save
energy:
Use dark colored or enamel coated cook-
ware in the oven since the heat transmis-
sion will be better.
While cooking your dishes, perform a
preheating operation if it is advised in the
user manual or cooking instructions.
Do not open the door of the oven frequently
during cooking.
Try to cook more than one dish in the oven
at the same time whenever possible. You
can cook by placing two cooking vessels
onto the wire shelf.
Cook more than one dish one after another.
The oven will already be hot.
Defrost frozen dishes before cooking them.
Use pots/pans with cover for cooking. If
there is no cover, energy consumption may
increase 4 times.
Select the burner which is suitable for the
bottom size of the pot to be used. Always
select the correct pot size for your dishes.
Larger pots require more energy.,
Initial Operation
Before first usage of your appliance, don't forget
to remove the sticker on the control panel.
moke and smeli rnay ern it for a couple of
~--•Ilours
during tile initial operation. This is
quitenormaL Ensure that Hw roorn is we !I
ventilated
24/EN
to remove the srnoke and smell. Avoid direc-
tlyinlla!ing the srnoke and the srnell Hmt
ern its.
Default setting for ciock is 12:00 afier initial
Active time setting automatically reset when
power failure. Please set the clock again.
1- Symbol of internal temperature
2- Area of active clock
3- Area of set temperature
4- Clear/Off toucllpad
5- Keylocktouchpadtodisableallkeys.
6- StarVApprove toud1pad for cooking
Settings Menu
Setting the clock
1-Touchthe "Settings" touctlpad once.
2-Display of timer, "Time" anrJ "Settings" toucll-
pads flash.
3-Edit the clock with using numeric keypad.
4-Wilen desired time entered, set the time by pres-
ing "Start" or wait approximately 10 seconds.
5-After making 12 hours setting, you can perform
AM-PM selection by using button number 8.

Advertisement

Table of Contents
loading

Table of Contents