Page 1
KSAI567 Bluetooth Karaoke Stage with ® Dual Microphones and Light Effects Owner’s Manual Please keep these instruction for future reference as they contain important information CAUTION: THIS IS NOT A TOY! Electrically Operated Product - Please use care when plugging into...
Page 2
WARNING Follow the advice below for safe operations. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 4
2. Fully insert the Microphone stand (wider outer pole) into the base connector . 3. Fully insert the cradle connector into the Microphone stand (upper pole) and fix it by fixing screw (included) . 4. Turn the height adjusting knob in counter-clockwise direction to loosen the joint, then move upper pole up and down to adjust the microphone stand to desired height.
LOCATION OF CONTROLS 2 3 4 5 6 Mic. Volume Control Knob Mic. Holders Master Volume Control Knob Tablet/Smartphone Holder Play/Pause/Pair Button Height adjustable Mic. Stand Power Button Power Indicator BT Pair Indicator Light on/off Pedal Mat Control Out Connector Mic.
POWER SOURCES AC OPERATION Plug the supplied AC adapter into the DC jack (12V DC input) on the rear panel of the unit and connect to a standard AC wall socket. Press the POWER ON/OFF button on the Karaoke system to turn on and the POWER INDICATOR will light. Note: When the unit is not operated for long periods of time, unplug the AC adapter from the unit and wall outlet.
1. Connect the supplied Microphone to either one of the MIC input jacks. 2. Press the POWER button to turn on the unit, the POWER INDICATOR will light. 3. Slide the ON/OFF switch located on the Microphone to the ON position and speak or sing into the Microphone.
Note: If it is not in use AUX In function, please unplug the AUX In cable on the rear side of this unit. Bluetooth OPERATION External devices that have a built-in Bluetooth feature can connect wirelessly to the unit. Getting Connected Pairing a Bluetooth device 1.
RESETTING THE UNIT If the system does not respond or exhibits erratic or intermittent operation, you may have experienced an electrostatic discharge (ESD) or a power surge that triggered the internal microcontroller to shut down automatically. If this occurs, simply disconnect the AC Adapter. Wait for at least 3 minutes and then setup the unit again as if you were using it for the very first time.
SPECIFICATIONS Audio Output Power : 2.5 W (RMS) (Mono) Sound Source input : Bluetooth, Aux In : 1 x 3.5 mm Aux In Jack : 2 x 600 ohms Impedance with 6.3 mm jack Microphone Inputs : 2 x Dynamic Microphone Microphone : AC Adapter: Input AC 100-240V~ 50/60Hz 0.8A...
Need help?
Do you have a question about the KSAI567 and is the answer not in the manual?
Questions and answers