Panasonic ER206 Operating Instructions Manual page 11

Cleaning blade & comb attachment
• We recommend cleaning when it gets dirty.
1. Remove the trimmer from the AC adaptor.
2. Remove the comb attachment and blade.
3. Clean the blade and the comb
attachments with running water.
• Rinse with water and shake up and
down several times to remove the water.
4. Wipe off the water with a towel and let
them dry naturally.
5. Apply the oil to the blade after drying.
6. Attach the comb attachment and blade to
the trimmer.
Notice
Washable parts only contain:
Blade and Comb Attachment
• The blade and comb attachment must be
dried out before being installed on the
trimmer; otherwise the trimmer may fail to
work due to the rusty motor.
Lubrication
Apply the oil to the blade before and after each use.
Apply a drop of oil to each of the circled ve points.
Remounting the blade
Fit the mounting hook into the blade
mounting on the trimmer and then push in
until you hear a click.
11