Specifications - Sharper Image 206093 User Manual

8. Unlock the safety switch and press the trigger. The compressor will now inflate your tire to
your pre-set pressure level. Then, it will shut off automatically.
9. Press the trigger of the compressor to stop the compressor if necessary.
10. Remove the thread connector from the tire or object after it is fully inflated.
INSTRUCTIONS FOR USE – BATTERY POWER
NOTE: You must charge your air compressor fully before the initial use. A full charge can take up
to 4 hours. To check battery level, insert the battery into the air compressor and press the Unit
button (center button). Normal charging time: 4 hours.
1. Remove the battery from the air compressor by gripping the end of the battery and pulling it
out.
2. Charge the battery with the included AC charger. Plug the charger into any standard AC
outlet. NOTE: Do not use any other charger. Use only the charger that came in this package.
3. When the battery is fully charged, you may begin inflation using steps 2-10 above.

SPECIFICATIONS

Operating voltage
Maximum current
Inflation efficiency
Maximum inflation pressure
Pressure gauge accuracy
Lithium battery capacity
Charging time
Length of hose
Operating temperature
Product size
Product weight
DC11.1~DC12V
Less than 12A
Inflates a typical car tire (185/70R14) from 0 to 30 psi
in 6 minutes
120 PSI
±0.5 PSI
2200mAh
4 hours
4.7"
32°F to 140°F
3" L x 3.3" W x 10.4" H
2.75 lbs.
- 3 -