Areas Of Application; Fitting/Removing Attachments - Silvercrest SDR 1100 B2 Operating Instructions Manual

Areas of application

You can clean either by using steam directly from the steam nozzle
can fit an accessory .
■ Do not use an accessory if you want to clean items such as toilets and sinks,
taps and drains, windows, furniture, fabrics, shutters or mirrors .
You can easily remove water and dissolved dirt from smooth surfaces after
cleaning using the squeegee attachment
NOTE
► The closer you hold the steam nozzle
better the effect . The steam pressure and temperature are at their highest
directly after leaving to the steam nozzle
► Stubborn stains and dirt must be soaked with water beforehand .
■ Use the angle nozzle
■ Use the round brush

Fitting/removing attachments

WARNING! RISK OF INJURY!
► Always remove the plug from the mains power socket before you fit/remove
an attachment .
► Wait until the appliance has cooled down before you fit/remove an attach-
ment .
► Wait until all of the steam has dissipated before you fit/remove an attach-
ment .
Extension hose
♦ Push the extension hose
The marking line on the extension hose
line on the appliance must be aligned with each other
(see fold-out page Figure A) .
♦ Turn anticlockwise until both marking lines on the extension hose
aligned with both marking lines on the appliance . The extension hose
remains locked in this position (see fold-out page Figure B) .
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position . This is, however, not possible with the
extension hose
■ The extension hose
■ 12 │ GB │ IE │ NI │ CY
for tight corners or joints, or hard-to-reach places .
12
for stubborn soiling, for example, on wheel rims .
11
on to the steam nozzle
9
.
9
is removed in the reverse order .
9
.
13
to the surface to be cleaned, the
6
.
6
as far as the stop .
6
and the marking
9
SDR 1100 B2
or you
6
are
9
9