Security Settings; Pind Code Lock; Phone Security Settings; Network Settings - ZANCO tiny t1 User Manual

Auto lock screen: Select the screen backlight time. There are "off", "15", "30", "1
minute", "5 minutes" five ways to choose to set.
display date and time: select "off" "open" two ways to select the settings.
Shortcut key settings
Set the navigation key to quickly enter the menu in the standby interface.
Flight mode
Select Activate: Normal mode / flight mode
other settings
LCD backlight Press the shortcut keys to adjust the brightness of the screen.
Picture quality
Select ("open", "close").
Key vibration
Select ("open", "close").

10.3 Security settings

You can use the PIN code, PIN2 code, set the power-on password and set the anti-theft
function to secure phone privacy.

Pind code lock

On / Off: The correct PIN code must be entered when the PIN code is turned on or off.
This option can be set to on or off; if set to open, each time you need to enter the PIN
code.
modify: confirm the correct input of the original PIN code can be entered after the new
PIN code. PIN can only be entered from 4 to 8 digits.
Note When you change your PIN, you must set the PIN code to On.
Change PIN: Confirm that you can enter the new PIN code after entering the correct
PIN2 code. PIN can only be entered from 4 to 8 digits.
Change PIN2 code: Confirm the correct PIN2 code after entering the correct PIN2 code.
PIN2 can only enter 4 to 8 digits.
Tip If you enter the wrong PIN code three times, the PIN code will be locked, you need to
enter the PUK code decoding (if 10 input PUK code error, SIM card will be
self-retirement!); PIN2 three consecutive input error, will be locked, Need to use the PUK2
code decoding, if the two passwords are not provided with the SIM card, please provide
you with SIM card operator inquiries.

Phone security settings

On / Off: This option can be set to on or off; if set to On, you need to enter the password
each time you turn on the phone.
modify the phone password: confirm the correct input of the original boot password and
enter a new power-on password. Power-on password can only be entered from 4 to 8 bits.

10.4 Network settings

You can choose to manually or automatically search, you can swim between the network.
Automatic selection: the phone will automatically search for different networks. This will
cause your phone to automatically register to the most appropriate network in your area.
Manual selection: Manually start searching for all available networks. Select your