Map Flashing - Vance and hines Fuelpak FP3 User Manual

IMPORTANT: The FP3 will marry to the fi rst VIN that it fl ashes. Once
you fl ash a motorcycle, the FP3 is permanently married to the VIN.
There is no way to undo this. The FP3 does not marry to the VIN until
you complete the fi rst fl ash. You can use the same FP3 device on a
different bike to read and clear trouble codes or view live sensor data,
but will not be able to fl ash.

MAP FLASHING

1. Go to 'Search for a Map' to search for an
appropriate map for your confi guration.
a. The FP3 will show only maps available
for your specifi c model and factory
engine confi guration. If further
modifi cations to the map are needed,
they will be made after fl ashing your
base map. (page 9)
b. If you do not see your exhaust
listed, please choose an equivalent
Generic or Vance & Hines map.
Contact V&H Customer
Support if you need
assistance selecting a map.
c. All FP3 maps are dyno tuned for
high fl ow air intakes. If you have
a stock intake, fl ash the map for
your exhaust with high fl ow air
intake – the ECU will trim the
map automatically as you ride.
2. After selecting components, locate and press your map result, located at
the bottom of the page.
3. Press 'Flash' (Android) or 'Program Bike With This Map' (iOS) and follow
on screen prompts.
• Pressing 'Save' (Android) will save the map to your library, but
will not fl ash it to the bike.
IMPORTANT:
DO NOT INTERRUPT POWER, CLOSE THE APP, OR ACCEPT A PHONE
CALL DURING THE FLASHING PROCESS. THE BIKE CAN NEVER BE
RUNNING WHEN TRYING TO FLASH A MAP.
MAP FLASHING
5
INSTRUCTION
PRESS MAP RESULT AFTER
FILTERING SELECTION