Table of Contents
Advertisement
Quick Links
1. Foreword
Congratulations on your purchase of a GIpro X-type gear position indicator.
The GIpro products from HealTech Electronics Ltd. are the most advanced gear position
indicators on the market today.
This GIpro model will fit all motorcycles and vehicles which have an electronic
speedometer (either analogue or digital readout). Your speedometer is electronic if the
odo/tripmeter has LCD readout. If your speedometer is cable driven, it is still possible to
install this product with our universal GPX-WSS harness kit.
Due to the advanced microprocessor and sophisticated firmware, the GIpro-X offers
faster and more reliable readings than competing products.
The unit is also the smallest, most compact gear indicator available, making it easy to
mount at the instrument cluster.
2. Installation
The Harness Kit required for the installation is supplied separately. Along with the X-type
display unit, please make sure to order the correct wiring harness kit for your bike.
Please refer to the install instructions received with the Harness Kit.
3. Operation
After programming, the unit shows the actual gear position while riding. Optionally, it
may also warn you when the set road speed and/or the set engine speed is exceeded.
Most motorcycles we list the GIpro X-type unit for are not equipped with Gear Position
Sensor, therefore determining and displaying the gear in use is only possible when the
engine is running and the clutch is fully released. At other times (clutch pulled-in, engine
not running, bike stopped) the display will show a "-" sign.
The GIpro will NOT show an incorrect gear in any circumstances, except for a split
second when the clutch is released slowly (slipping) during a back shift.
4. Specifications
- Supply voltage: +8V to +24V
- Maximum supply current at 12V: 60 mA
- Reverse polarity and transient protection on all leads
- Unit size: 20 x 30 x 13 mm (0.7 x 1.2 x 0.5 inches)
- Operating temp: -40C to +80C (-40F to +176F)
- Waterproof (IP68)
GPXT_UsersGuide_en.pdf
www.healtech-electronics.com
GIpro X-type
Gear Position Indicator with programmable
Engine Speed and High Speed Warning
User's Guide
[rev. 001]
2
G
- 1 -
Advertisement
Table of Contents
Summary of Contents for Heal-Tech GIpro X-type G2
-
Page 1: Specifications
GIpro X-type Gear Position Indicator with programmable Engine Speed and High Speed Warning User’s Guide 1. Foreword Congratulations on your purchase of a GIpro X-type gear position indicator. The GIpro products from HealTech Electronics Ltd. are the most advanced gear position indicators on the market today. - Page 2 5. Features Fast and accurate Instant and accurate indication of the selected gear (right after the clutch is released) for added control and safety. The sampling period can be adjusted to make the response quicker or slower, depending on shift speed and signal conditions. Touch sensor All settings can be done via the touch sensor so there’s no opening on the housing, it is completely sealed and encapsulated in epoxy.
- Page 3 To access the menu, follow these steps, in this order: - The TOP side of the housing is the touch sensitive area so it must be kept free, away from all objects. If the unit is in a mount, remove it first. - Have the ignition OFF (the display must be blank).
- Page 4 6.3. Adjusting the filtering In the menu, select the “F” sign and do a long tap. The filtering (sampling period) can be adjusted to make the response quicker or slower during a gear change. It can be adjusted in 10 steps (from 0 to 9). The factory default value is 4.
-
Page 5: Cleaning The Display
To ACTIVATE the ESW function: Start the engine and let it idle. In the menu, select the “E” sign and do a long tap. The display shows a spinning wheel animation. Start riding. The spinning wheel animation will speed up, indicating that it is learning the highest RPM value.
Need help?
Do you have a question about the GIpro X-type G2 and is the answer not in the manual?
Questions and answers