COOLABAH 40185 Instruction Manual

CLEAN AND MAINTANENCE Ensure the Coolabah® Bug Zapper is disconnected from its
power source before performing any type of maintenance.
The electrified grid is self-cleaning, however if there are any insects left between the vertical
hanging grids, blow away with an air blower or use a long handle paint brush to dislodge. Do
not remove the cage of the bug zapper to clean the grid.
DAYTIME PESTS: wasps, beetles and flies are odour or heat seeking and do not respond
primarily to black light UV light, however increased numbers of these pests can be lured to
your Bug Zapper with baiting. Bait such as honey can be applied to a piece of cloth and hung
from the underside (use of lures is also recommended, available on our website)
STORAGE: Store in a cool dry place when not in use. Clean vertical hanging grid (as directed
above) if required.
WASTE PRODUCTS: Dispose of expired energy saving Black Light UV globe in with general
waste, they are non-recyclable
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE
Black Light UV lamp does 1) Zapper is not plugged into a
not light but there is live power point
zapping on the electrified 2) Lamp has dislodged from
grid lamp holder
1) New grid is significantly
quieter than traditional grids.
Lamp operates but there
The quiet operation is less
is no zapping on the grid
likely to disturb you or your
pets.
Intermittent or constant 1) Electrified grid may have a
zapping of electrified grid large dead insect shorting it.
1) Bug Zapper Is positioned
Bug Zapper does not
incorrectly/ not operated at
attract flying insects
correct times
Lamp does not operate 1) Zapper is not plugged into
and electrified grid is not live power point
zapping 2) Electrical component failure
Product Number: 40185
Model Number: 40185
After Sales Support: 1800 677 982
Email Support: sales@kellycompany.com.au
Date: 11/2018
COOLABAH® BUG ZAPPER 20W
CORRECTION
1) Plug into new power point,
ensure socket is ON
2) Contact licenced electrician to
twist globe in a clockwise
direction to secure
1) Check for insects on the grid or
below zapper. Dead insects
indicate a functioning unit.
2) No insects around contact
After sales support
1800 677 982
1) Turn off Bug Zapper and follow
cleaning instructions (above)
1) Review positioning the Bug
Zapper (page 5) and re-position
Operate 24/7 or dusk to dawn.
2) Bait zapper for odour specific
insects or use insect specific
lures Call 1800 677 982 for info.
1) Try operating from a different
power point
2) Contact After Sales Support
Hotline: 1800 677 982
INSTRUCTION MANUAL
Tested and approved to: AS/NZS 60335.2.59 and AS/NZS 60335.1
Product Number: 40185
Model Number: 40185
Page 8
After Sales Support: 1800 677 982
Email Support: sales@kellycompany.com.au
Date: 11/2018
COOLABAH® BUG ZAPPER 20W
BUG ZAPPER 20W
V3 June 2018 On Sale 11/2018
Product Number: 40185
Model Number: 40185
AS/NZS CISPR 14.1:2013
NSW12309
Page 1