EUROPOWER PMH1000/PMH3000/PMH5000 IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
It is our philosophy to share our joy with you, because you are the most important member of the BEHRINGER team. With your highly competent suggestions for new products you’ve greatly contributed to shaping our company and making it successful.
BEHRINGER is a company with its roots in professional recording studio technology. For many years we have been successful in developing products for studio and live use. These include microphones and 19"...
(XLR connector) which provides +48 V phantom power for condenser microphones at the touch of a button (see rear panel). PMH1000: The two stereo channels 5/6 and 7/8 have an additional balanced XLR microphone input with +48 V phantom power.
The upper LIM LED illuminates when the internal amp protection circuit responds to levels that are too high. PMH1000: The POWER LED is illuminated when you switch the unit on. The LIM LEDs and the LED display do NOT light up when...
PMH3000/PMH5000: MON1/2 fader. These faders are used to set the monitor output volume (see also PMH1000: The main mix allows you to control the volume from the Main 1 output with both faders. PMH3000/PMH5000: The MAIN 1 fader controls the volume of the EUROPOWER.
AC power cord. 4.2 Audio connections The inputs and outputs of your BEHRINGER EUROPOWER are unbalanced 1/4" mono jacks—except for the mono channel line inputs, which are balanced 1/4" stereo jacks. Of course, all inputs and outputs work with both balanced and unbalanced connectors.
EUROPOWER PMH1000/PMH3000/PMH5000 Fig. 4.1: 1/4" TS connector Fig. 4.2: 1/4" TRS connector Fig. 4.3: XLR connectors Fig. 4.4: 1/4" mono plug for footswitch 4.3 Loudspeaker connections Your power mixer is equipped with high-quality loudspeaker connectors (compatible to NEUTRIK safe and trouble-free operation. The SPEAKON especially developed for high-power loudspeakers.
OUTPUT B, the AMP MODE selector switch its lower position “BRIDGE”. A separate stereo power amp (BEHRINGER EUROPOWER EP1500) connected to the preamp main outputs delivers the stereo main signal. Two active monitor speakers for on-stage operation are connected to the preamp monitor output.
Page 11
For a dual mono operation, the AMP MODE switch be set to its center position (MON1/MONO for PMH3000/PMH5000 or MON for PMH1000)! The two loudspeaker outputs provide the main and the monitor signals, separately from each another. Each of these signals is then sent to two speakers wired in parallel.
Page 12
EUROPOWER PMH1000/PMH3000/PMH5000 Fig. 5.5: Expanded set-up This application is an expanded set-up based on the standard set-up as shown in fig. 5.4, and provides additional connection options. Again, this is just an example, which can be expanded in various ways.
Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
Need help?
Do you have a question about the Europower PMH1000 and is the answer not in the manual?
Questions and answers