Vertex Omega 130 Owner's Manual

Vertex™ Omega 130 Protein Skimmer
Thank you for your purchase of the Vertex™ Omega 130 protein skimmer. Please be sure to read and follow this
brief guide to ensure proper install and operation of your device.
In the box:
1- Omega 130 Skimmer Body
2- Sicce™ Custom Syncra V-130 Pump
3- Custom Pump-Head and Adjustable Nozzle
4- Silicone Air Tube
5- PU Ozone Tube
6- Pump Output pipe/Angular Discharge
7- 10mm Drain Outlet coupler
8- Sicce™ Syncra Owner's Manual
9- Omega 130 Owner's manual
Install and operate:
1- Remove your skimmer and its components from the box and inspect for any possible defects. If there are
any concerns please contact your dealer within 48 hours of receiving your skimmer, refrain from installing
the unit, keep all original packaging as well as proof of purchase.
Any damages to the unit during transport are not covered under warranty and must be claimed with
the forwarder at the time of receiving the product.
2- After proper inspection, clean the unit with a damp cloth using RO water to ensure removal of any oils
and/ or chemicals used during the manufacturing process.
3- Remove the Collection Cup from the skimmer; simply unscrew counter-clockwise holding the cup.
4- Screw the Output pipe to the pump's Output. Do not over tighten! A 2.5mm O-ring is seated at the end
of the threading. This will remove the possibility of leaking Air as well as providing cushioning to make
sure the pipe can be turned to match the angle of the inner bubble chamber hole. "Refer to Diagram 1"
Vertex™ Omega 130 / Instruction Manual
© Vertex Technologies