Dewert duomat 7 care l Installation Instructions Manual page 6

DUOMAT 7 CARE L/HOSP L
b) Technical data
Power supply............................................... :
Power consumption with rated load............ :
Permissible compressive force....................:
Permissible compressive force per side......:
Fuse............................................................ :
Operating mode at max. rated load.............:
classification................................................:
Noise level...................................................:
Current input of all slave drives .................:
Drive type.................................................... :
Drive options............................................... :
3)
Stroke (other strokes on request)............. :
Adjustment speed .....................................:
Protection category......................................:
Colours........................................................:
Dimensions and weights
Length x width of the drive.......................... :
Axle base.....................................................:
Weight......................................................... :
Technical data of battery backup system
Voltage........................................................ :
Capacity.......................................................:
Fuse............................................................ :
Battery type................................................. :
Ambient and storage conditions
Room temperature...................................... :
Rel. humidity................................................:
Barometric pressure....................................:
1)
Operating mode =
period of 18 min. must be observed, otherwise operational
2
)
According to regulations, no more than two drives may be run simultaneously at the rated load!
3)
Stroke = maximum distance that the push block travels from the starting position in the retracted state to the end
position in the extended state.
4)
Adjustment speed = speed at which the push block travels without load (speed varies according to the load)
6
2
4)
intermittent duty AB 2 min./18 min.
100 / 110 / 115 / 120 / 230 / 240 VAC 50-60 Hz
0.63 A AC - 3.15 A AC (depending on mains
voltage and load)
max. 7000 N (double-sided)
max. 3500 N
T 0.63 A – T 3.15 A (depending on mains voltage)
intermittent duty AB 2 min./18 min. Protection
I or II
65 dB(A)
≤
max. 7.5 ADC
dual drive
MONOMAT / DUOMAT / TRIOMAT /
TRIO/QUAD / QUADROMAT
87 – 69 (standard) / 87 – 87 / 69 – 69 mm
from 3 to 5.5 mm/s
IP44
see sales brochure
750 x 175 mm
750 x 190 mm with "Emergency Release"
581 mm
approx. 6.3 kg (without battery backup system)
2 x 12 VDC
1.2 Ah (with new batteries))
T 15 A
Lead battery
from +10° to +40° C
from 30% to 75%
from 700 hPa to 1060 hPa
, i.e. run for 2 min. max. under rated load, then a rest
failure could occur !