Summary of Contents for Whalen Jasper Chrome & Glass Pier
Page 1
Or visit our web site 24 hours a day, 7 days a week for product assistance at www.whalenfurniture.com Or e-mail your request to parts@whalenfurniture.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Furniture Mfg., Inc. Page 1 Factory No. 16015...
Page 2
4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam. You are now ready to assemble the KD unit. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 2 Factory No. 16015...
Page 3
N- Drawer Housing Back Panel (1) O- Drawer Housing Top Panel (1) P- Drawer Front (1) Q- Drawer Back Panel (1) R- Drawer Left Side (1) 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 3 Factory No. 16015...
Page 4
(18) Handle (1) Glue (1) Touch-up Pen (1) Tipping Restraint Hardware Kit (1) (Included in plastic bag) Tools required: Phillips screwdriver and hammer (not provided) 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 4 Factory No. 16015...
Page 5
4. Securely screw four Cam Bolts (2) into the designated small holes on the Drawer Front (P) with a Phillips screwdriver, as shown. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 5 Factory No. 16015...
Page 6
6. Slide the Drawer Bottom Panel (T) into the grooves between the Drawer Side Panels (R and S) until fully inserted into the Drawer Front (P). Make sure the finished surface will face up. As shown. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 6 Factory No. 16015...
Page 7
As shown. 9. Attach the Handle (18) to the outside of the Drawer Front (P) using two provided Handle Bolts (17). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 7 Factory No. 16015...
Page 8
13. Attach the separated Slide Tracks (Y) to the Slide Supports (K) respectively with three 1/2” Screws (9) per slide track. Ensure the slide opening points towards the front of the unit. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 8 Factory No. 16015...
Page 9
Back Panels (C and G) with the holes facing up. Securely screw the Cam Bolts (2) into the designated small holes, as shown in the illustration. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 9 Factory No. 16015...
Page 10
Bottom Back Stretcher (M) by engaging two Cam Locks (1) (Refer to page 2 on Cam Lock system operation supplement). Make sure that the Cam Locks will face inward. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 10 Factory No. 16015...
Page 11
Wood Dowels (3) and two Cam Locks (1), as shown. Make sure that most of the Bottom Panel (J) extruded out of the Drawer Housing Side Panel. Outside Outside 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 11 Factory No. 16015...
Page 12
25. Align and attach two Upper Side Panels (I) to the Drawer Housing Top Panel (O) with two Wood Dowels (3) and two Cam Locks (1), as shown. Ensure the Cam Locks and shelf pin holes face inward. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 12 Factory No. 16015...
Page 13
Cam Bolt holes. Position the Left and Right Top Panels (A and E) onto the inserted Wood Dowels (3) and attach in place by engaging the Cam Locks (1). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 13 Factory No. 16015...
Page 14
30. Gently tap a Floor Protector (13) to the bottom of Front and Back Panels (B, C, F and G) respectively. Make sure the Floor Protectors rest on the center of panel for avoiding any damage or crack. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 14 Factory No. 16015...
Page 15
NOTE: DO NOT fully-tighten the bolts initially until all the bolts are ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the bolts. 14/15 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 15 Factory No. 16015...
Page 16
F) at your desired height. Make sure you place the Shelf Pins in the same level so the shelf is not tilted. Tilt and rest the Glass Shelf (V) onto the installed Shelf Pins (16) properly. B/F/I Long edge 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 16 Factory No. 16015...
Page 17
If you wish to add the extra security of earthquake restraints, they must be purchased and installed separately. Tools required: Phillips screwdriver, Power Drill, 3/8” Drill Bit and Rubber Mallet. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 17 Factory No. 16015...
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
Page 19
IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW Jasper Chrome & Glass File Pier (ODUS-CGTP) *ODUS-CGTP-1-GT Glass Top *ODUS-CGTP-25-16BBS 16" Ball Bearing Slides *ODUS-CGTP-2-GS Glass Shelf *ODUS-CGTP-26-H Handle *ODUS-CGTP-3-LTP Left Top Panel *ODUS-CGTP-27-HB Handle Bolt *ODUS CGTP 4 LFP *ODUS-CGTP-4-LFP Left Front Panel...
Need help?
Do you have a question about the Jasper Chrome & Glass Pier and is the answer not in the manual?
Questions and answers